Thermocouple temperature acquisition module: MU-Thermocouple1 CAN FD
熱電偶溫度采集模塊
MU-Thermocouple1 CAN FD
MU-Thermocouple1 CAN FD, thermocouple measurement module CAN collect and pre-process thermocouple measurement data and transmit it through CAN FD. It has 8 temperature measurement connection channels, and can choose different temperature range (T, K, J) models according to different product versions. Temperature can be obtained in Celsius, Fahrenheit, or Kelvin using independent scale and error Settings. The measured data is transmitted by CAN FD or conventional CAN.
Data processing, message transmission, and LED indicators can be configured using the free Windows software Thermocouple FD Configuration. Configurations created on the computer are transmitted via the CAN bus to the MU-Thermocouple1 CAN FD device, where they run on an independent CAN node. Multiple Thermocouple FD Configuration devices can be independently configured on a single CAN bus.
Requirements: Configuration requires the use of PEAK CAN interfaces.
System Requirement
For power supply:
- 12V DC power supply (8 to 30v also applicable), connected via matching connector.
For configuration (via CAN) :
- A computer running Windows 10,8.1 (32 or 64-bit)
- Configuration software Thermocouple FD Configuration
- A PCANUSB or equivalent PCAN card is required
- The PCAN card and temperature module have realized CAN connection. (120 Ohm terminal resistance at both ends of the CAN bus in parallel)
Technical Specifications
- 8 mini sockets for thermocouple types J, K, and T (as per assembly when ordered).
- 4 electrical isolation measurement modules
- Each with 2 identical thermocouple sockets.
Measurement ranges:- J: -210 to +1121 °C
- K: -200 to +1370 °C
- T: -200 to +400 °C
- Measurement accuracy: 0.2% or 1K
- Reference sensor accuracy: Typical ±0.5 K, maximum ±1.0 K (at +25 °C ambient temperature).
- Temperature data resolution: 1/16 °C
- High-speed CAN connection (ISO 11898-2) for data transfer and configuration.
- Compliant with CAN 2.0 A/B and FD standards.
- CAN FD data segment (up to 64 bytes) baud rates: 25 kbit/s to 10 Mbit/s.
- CAN baud rates: 25 kbit/s to 1 Mbit/s.
- NXP TJA1044GT CAN transceiver.
- Electrical isolation up to 500 V.
- Multiple LEDs for channel and power indication.
- Configurable via Windows software Thermocouple FD Configuration.
- Aluminum alloy casing with mounting flange or optional DIN rail installation.
- Power supply voltage: 8-30 V.
- Ultra-wide operating temperature range: -40 to 85 °C.
Order Number
- MU-Thermocouple1 CAN FD, aluminum alloy housing
- Matching connectors for power supply
- Configuration software Thermocouple FD Configuration for Windows
- User manual in PDF format
| Model | Order Number |
| MU-Thermocouple1 CAN FD (Measuring range J) | IPEH-004005-J |
| MU-Thermocouple1 CAN FD (Measuring range K) | IPEH-004005-K |
| MU-Thermocouple1 CAN FD (Measuring range T) | IPEH-004005-T |
Accessories Package Solution
Product Model: MU-Thermocouple1 CAN FD(IPEH-004005-K/J/T）
CAN Card (Optional Interface)- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
120Ω Terminator Resistor - Male to Female (Quantity Optional) - DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
CAN Card (Optional Interface)- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
- DB9 Extension Cable
- DB9-OBD Cable (2/4)
- DB9 to 4mm Banana Plug Adapter
CAN Card (Optional Interface)- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
- DB9 Extension Cable
- DB9-OBD Cable (2/4)
- DB9 to 4mm Banana Plug Adapter
- Thermocouple wire -Thermocouple
- Thermocouple plug -Thermocouple
