PCAN-Ethernet Gateway DR : CAN轉LAN以太網關
PCAN-Ethernet Gateway DR
CAN轉LAN以太網關
The PCAN-Ethernet Gateway enables the connection of different CAN buses through an IP network. CAN frames are encapsulated in TCP or UDP packets and then forwarded from one device to another via the IP network.
The gateway provides one LAN connection and two high-speed CAN interfaces. The DIN rail plastic casing and support for an extended temperature range make this module particularly suitable for industrial environments.
Configuration of the device is easily done through a web interface, and the JSON interface allows access through software. In addition to displaying various status information, both methods show device settings, communication interfaces, message forwarding, and filters.
Technical Specifications
- ARM9 Freescale iMX257 with 16 kByte Level 1 Cache and 128kByte internal SRAM.
- 256 MByte NAND Flash and 64 MByte DDR2 RAM.
- Linux operating system (version 2.6.31).
- RS-232 connector for serial data transmission (reserved for future use).
- Reset button for device reboot and factory default restoration.
- Configuration of network interfaces and message forwarding through a web interface.
- Plastic casing (width: 22.5mm) suitable for DIN rail mounting (DIN EN 60715 TH35).
- LED indicators for device status and power.
- Power supply voltage: 8 to 30V.
- Extended operating temperature range: -40 to 85°C.
LAN Attributes
- Data transmission using TCP or UDP
- 10/100/1000Mbit/s baud rate.
- RJ-45 connector with status LED.
CAN Attributes:
- 2 high-speed CAN channels (ISO 11898-2)
- Bit rates range from 5 kbit/s to 1 Mbit/s.
- NXP PCA82C251 CAN transceiver.
- Electrical isolation up to 500V between CAN channels, CAN and RS-232, and power.
- Complies with CAN specifications 2.0A and 2.0B.
應用及鏈接方法
- Connect two remote CAN nodes with two gateways
- Connect the CAN network to the PC using 1 gateway
- When connected to a PC, it can be applied in two ways:
- Configure packet sending and receiving using the virtual gateway software package
- Through the virtual gateway software package, through the API virtual connection, the gateway can be directly
- Used as a CAN card (similar to USB, PCI and other interfaces), you can directly use PCAN-View, PCAN-Explorer6 and other software, you can also do secondary development based on API.
- PCAN-Ethernet gateway DR, guide plastic housing
- Matching connectors for CAN channels, RS-232 and power supplies
- RJ-45 network patch cord (2 m)
- User manual in PDF format
Item number IPEH-004010
