PCAN-LIN: CAN, LIN Gateway
PCAN-LIN: CAN, LIN Gateway
Cost-effective CAN, LIN gateway, can realize the conversion between CAN, LIN, 232 three, after downloading the configuration can run independently, which means that PCAN-LIN can be directly connected to your device, to achieve the conversion between CAN and LIN.
- The PCAN-LIN module facilitates communication between CAN, LIN, and serial interfaces.
- Encased in a lightweight plastic housing, it contains firmware to enable data exchange between different bus systems.
- Various modes can be configured using software, such as using the module as an LIN master station to request and route LIN data to the CAN bus and/or serial interface. With an ID offset, data can be exchanged between CAN and LIN.
![](https://aiportek.com/wp-content/uploads/2023/11/PCAN-LIN_02.jpg)
Technical Specifications
- The universal gateway (or router when using Acceptance Code / Acceptance Mask functions) includes the following:
- RS-232 to LIN (and vice versa).
- CAN to LIN (and vice versa).
- RS-232 to CAN (limited bandwidth).
- CAN communication supports a baud rate of up to 1 Mbit/s.
- LIN communication operates at baud rates from 1 to 20 kbit/s.
- Sending/receiving LIN 1.x and 2.x frames.
- It can function as either the primary controller or secondary device in a LIN network
- Simulating LIN secondary device behavior with data modification via CAN frames.
- Handling a user-defined LIN ID list with limited entry, and cyclic processing.
- Standard baud rates are set at 19200 bit/s for LIN and 500 kbit/s for CAN.
- Individual LIN frames can be initialized via CAN or RS-232.
- Power supply voltage: 9 - 30V.
- Operating temperature ranges from -40°C to 85°C.
- PCAN-LIN接口,塑膠殼
- 配置與監視工具PCAN-LIN Config for Windows® 11 (64-bit) , 10 (32/64-bit)
- 使用手冊PDF格式
說明 | No. |
PCAN-LIN High-speed CAN | IPEH-002025 |
---|---|
PCAN-LIN Low-speed CAN | IPEH-002028 |
PCAN-LIN high-speed CAN photodecoupling | IPEH-002029 |
Accessories Package Solution
Product Model: PCAN-LIN(IPEH-002025/002028/002029)
DB9 Cable Board
- Power Supply (12V)
- 串口線(USB轉RS232
DB9 Cable Board
- Power Supply (12V)
- Serial cable (USB to RS232)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
- DB9 Extension Cable
- DB9-OBD Cable (2/4)
- DB9 to 4mm Banana Plug Adapter