PCAN-Rourter Pro FD: Indicates the 6-channel CAN FD Gateway
PCAN-Rourter Pro FD
6通道CAN FD網關
6-channel CAN FD gateway with digital IO and data logging (optional single-channel Ethernet interface)
The PCAN-Router Pro FD connects the data streams of new CAN FD and classic CAN buses through six channels. The pluggable CAN transceiver modules allow flexible adaptation to the specific requirements of each CAN channel. Furthermore, this router is equipped with one analog input and four digital I/Os. CAN messages can be recorded in internal storage or on an inserted memory card, and they can be directly exported via USB to a PC.
With the PCAN-Router Pro FD, you can manage, monitor, and control data streams in testing environments and production facilities. The conversion from CAN to CAN FD or vice versa allows the integration of new CAN FD applications into existing CAN 2.0 networks. The PCAN-Router Pro FD can be individually programmed for configuration. Firmware is created using the included GNU compiler development kit for C and C++, and it can be transferred to the module via CAN. Various programming examples (such as message forwarding or recording) assist in implementing your own solutions.
In addition to editable routines, the PCAN-Router Pro FD development kit includes firmware for immediate use in recording CAN data. CAN messages can be recorded in the internal eMMC storage (with 16GB of storage space) or an external SD card, and both can be read via USB. Programming the data recording function for all six CAN channels of the PCAN-Router Pro FD requires a Windows development kit with GCC ARM Embedded, and the formatting won't be affected during configuration updates.
![](https://aiportek.com/wp-content/uploads/2023/11/PCAN-Router-Pro-FD_01-1-1.jpg)
Technical Specifications
- 6 high-speed CAN channels (ISO-11898-2)
- Complies with CAN standards0 A/B and CAN FD
- CAN FD supports ISO and non-ISO standards
- CAN FD data field (up to 64 bytes) bit rates range from 40 kbit/s to a maximum of 12 Mbit/s.
- CAN bit rates range from 40 kbit/s to a maximum of 1 Mbit/s.
- CAN transceiver NXP TJA1043 with wake-up functionality
- Choice of required CAN transceiver modules as needed
- Connected to CAN via a 9-pin D-Sub connector
- Terminal resistors for each CAN channel can be individually enabled or disabled
- Wake-up function using a separate input, CAN bus, or real-time clock
- 2 digital I/Os, each can be used for digital input or output, high-side
- 2 digital I/Os, each can be used for digital input or output, low-side
- 1 analog input (0 – 33 V)
- Recording CAN messages and error frames
- Internal storage: 16GB eMMC
- SD card can also be used
- Access data via USB (e.g., recorded CAN messages)
- Use Windows software PEAK-Converter to convert recorded CAN message files into ASC or CSV formats
- Buzzer.
- LED lights for displaying the status of CAN channels, memory card, and power
- Microcontroller STM32F765NIH6 (based on Arm ® Cortex ® M7)
- 32 MByte SDRAM in addition to microcontroller RAM
- Aluminum alloy casing with flange
- Power supply: 8-32V, with overvoltage and reverse polarity protection
- Backup battery slot for defining shutdown behavior (e.g., for preserving log data)
- Customizable options:
- Ethernet interface RJ45
- BroadR-Reach ® interface via DB9
- Extended operating temperature range from -40 to 85°C (-40 to 185°F)
觸發方式
There are three triggering modes: power-on triggering and manual triggering. Manual triggering includes the Log Off Card button (external button) and remote packet triggering. The packet cannot be used for communication.
The record mode is also configurable, mainly with linear substitution (when a new record is started, the existing record file is deleted; When the memory is full, the record will stop), linear overwrite (when a new record is started, the existing record file will be preserved; When the memory is full, the record will stop), loop overwrite (when a new record starts, the existing record file will be retained; When the memory is full, the original file is deleted and a new file with a larger file number is created. This is the default mode) of these three.
When recording data, you can also record the file in CSV format. Of course, you can also convert the recorded message file into another format, such as ASC, using PEAK-Convter, which is provided free of cost by the company, and is compatible with analysis software such as CANoe and VSPY.
![](https://aiportek.com/wp-content/uploads/2023/11/News_PCAN-Router-Pro-FD_Ethernet.jpg)
System Requirement
- Windows® 11(64-bit),10(32/64-bit)
- About CAN FD bus connection: CAN FD interface from PC to PEAK-System (e.g. PCAN-USB FD)
- Shipping List
Order Number
- PCAN-Router Pro FD host
- USB cable
- With GCC ARM Embedded Windows development kit, and supporting routines
- PEAK-Converter for Windows 11(64-bit), 10(32/64-bit)
- User manual in PDF format
Note: PEAK's CAN card is required to download the firmware
Name | No. |
PCAN-Router Pro FD | IPEH-002220 |
PCAN-Router Pro FD with Ethernet interface | IPEH-002222 |
Accessories Package Solution
Product Model: PCAN-Router Pro FD(IPEH-002220/0022222)
CAN Card (Optional Interface)
- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
CAN Card (Optional Interface)
- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
- DB9 Extension Cable
- DB9-OBD Cable (2/4)
- DB9 to 4mm Banana Plug Adapter
CAN Card (Optional Interface)
- 120Ω Terminator Resistor - Male to Female (Quantity Optional)
- DB9 Cable Board
- Power Supply (12V)
- DB9 Adapter (Female-Female/Male-Female/Male-Male)
- DB9 Serial Cable (Multi-Head)
- DB9 Extension Cable
- DB9-OBD Cable (2/4)
- DB9 to 4mm Banana Plug Adapter
- Memory Card (32G) - 6 channels