- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
Baby-LIN-RM-III

Baby-LIN-RM-III
Function Overview:
- Professional LIN bus test tool that emulates one LIN master node and multiple slave nodes simultaneously, with pushbuttons to trigger LIN node actions via key events.
- Small but powerful system for controlling the LIN bus via USB. Emulates LIN master or LIN slave nodes. Isolated LIN interface to avoid ambient noise.
- The Baby-LIN-RC-II incorporates a 6-key membrane keyboard. Each key can be assigned to any LIN bus command and will perform the appropriate LIN bus operation whenever you press the key. In addition, if one or two second function keys are used, a total of 10 or 12 different key events can be generated.
- The device also supports stand-alone use without a computer. Thus the durability test sequence can be defined as macros and the connection to the LIN bus is automatically activated without the need for a computer.
- PC software development based on DLLs, with secondary development routines for C#, Visual C, Visual Basic and LabView.
- Supports WINXP, VISTA, WIN7 (32/64 Bit) and WIN8 (32/64 Bit) and Linux.
- Main Features
- Key Specifications
- Shipping List
- Local monitoring, real-time reading, recording, sending and displaying of LIN data.
- Supports LIN device diagnostics and DTL (Diagnostic Transport Layer) such as 3C/3D services.
- Local modification and testing of all control parameters, message signals, frame timing, program timing
- The Baby-LIN-II LIN bus transceiver supports baud rates up to 200K. Although standard LIN devices support up to 20K, there are a growing number of high-speed LIN devices that exceed 20K communication rates, use non-LIN standard protocols, or are swiping a node at a higher baud rate, and require a supporting device to monitor and communicate. Baby-LIN-II can realize these applications in ASCII-Mode.
- One price covers the functionality of many devices on the market: such as LIN Bus Emulator, LIN Bus Diagnostic, LIN Bus Tester, LIN Bus Analyzer, LIN Bus Adapter, etc...
- Master-slave simulation and analysis of LIN nodes/systems to simulate bus participants that do not actually exist. For example, it simulates ECUs and other outgoing data, and supports virtual simulation, semi-physical simulation, and "listen-only" mode.
- Supports event-based signal configuration, sequence control, error determination, and triggering actions.
- Trigger actions to be performed (e.g. run or stop, send another message, change a signal value, etc.) by various event triggering conditions (signal events, message frame events, changed events, etc.)
- Signal events include the result of comparison between signal values, the result of comparison between signal values and constants, and the range of signal changes.
- Frame events include selected frames appearing on the bus, errors in frames (e.g. checks and errors, nodes not responding, etc.)
- Changed events include a change in a signal value, or a change in a message frame.
- Typical tests include: for example, when the product under test has an abnormality, detecting the error through LIN telegrams and stopping the equipment or triggering the sending of a certain command by Baby-LIN-II; for example, after a fixed period of time, starting the cycle of testing for 8,000 times: forward and backward rotation, start-up operation, different angles of openness, etc.; for example, when the production line workers activate Baby-LIN-II. For example, a production line worker activates the Baby-LIN-II module to automatically complete a series of tests before the product is shipped out of the factory: from startup to running to stopping the continuous test.
- Baby-LIN-RC-II is a LIN Bus Controller, which can be used for LIN bus simulation, ECU testing, automated test systems, secondary development, etc.
- Equipped with a 6-key membrane keyboard, it is possible to program up to 12 virtual keys through the optional switching function (F5/F6).
- Can be connected to a computer via USB; or run independently offline to emulate a LIN node.
- Supports LIN bus versions 2, 1.3, 2.0, 2.1 and 2.2.
- Electrical isolation between LIN device and computer
- Used to emulate LIN bus master and slave nodes, multiple slave nodes can be emulated at the same time.
- Real-time access to LIN signal and message data (read and write)
- Time stamped for monitoring and recording
- LIN diagnostic support, DTL (Diagnostic Transport Layer) support
- Baby-LIN-II operating voltage 8-28V (12V recommended)
- LINWorks software includes an LDF file editor; device configuration tools and a fully customizable user interface;
- PC software development based on DLL, with secondary development routines for C#, Visual C, Visual Basic and LabView.
- Very compact and portable device: 85 x 45 mm
- Supports WINXP, VISTA, WIN7 (32/64 Bit) and WIN8 (32/64 Bit) and Linux.
- One Baby-lin-RC-II Module
- One with 1.5 meter USB cable
- One CD-ROM: with device drivers, documentation, hosting software LINWorks for windows and linux (for configuration, monitoring, analysis, etc.)
Accessories Package Solution
Item No. : Baby-LIN-RC-II

Basic Set
- Terminal block (3)
- Wire Harness
Please consult Hongke sales staff for the price of accessories set

Basic Set
- Terminal block (3)
- Wire Harness
- DB25 Distribution Board
- Power Supply (12V)
Please consult Hongke sales staff for the price of accessories set

Standard Set
- Terminal block (3/4)
- Wire Harness
- SD card
- Card Reader
- Power Supply (12V)
- USB Data Cable
Please consult Hongke sales staff for the price of accessories set

Baby-LIN-II-ENG
Professional LIN bus simulation tool

Baby-LIN-MB-iI
LIN to RS232/Ethernet module for automated test systems or EOL devices

Harp-5
Handheld CAN, LIN bus simulation test tool

Baby-LIN-RM-III
Simultaneous emulation of one LIN master node and multiple slave nodes with keypad and digital IOs can be used in conjunction with a PLC to realize automated testing.