![](https://aiportek.com/wp-content/uploads/2023/11/PCAN-Router-FD_02.jpg)
PCAN-Router FD: CAN FD And CAN Universal Programmable Converter
通用的CAN/CAN FD總綫路由器,可實現CAN/CAN FD網絡數據轉發的功能,可用於延長通信距離。
通用的CAN/CAN FD總綫路由器,可實現CAN/CAN FD網絡數據轉發的功能,可用於延長通信距離。
Function Overview:
- The PCAN-Router FD is capable of connecting to 2 CAN FD or CAN buses. Built on an ARM Cortex M4F microcontroller, the module's behavior and data routing between the 2 CAN FD channels are fully programmable. Notably, this module facilitates seamless conversion between CAN and CAN FD, making it effortless to integrate CAN FD applications into existing CAN 2.0 networks.
- Firmware can be created using programming libraries and the GNU compiler for C and C++. It is then transferred to the module via the CAN interface. When shipped, the PCAN-Router FD includes pre-loaded sample firmware, and the corresponding source code is provided in the shipping package.
- The module is installed in an aluminum profile casing, and is shipped in versions with two D-Sub connectors or a screw-terminal strip.
技术规格
系统要求
发货清单
订货号
资料下载
技术规格
- NXP LPC4078 microcontroller (ARM Cortex M4 with FPU, 120 MHz)
- Onboard 4 kByte EEPROM
- 8 MByte SPI flash memory
- 2 high-speed CAN channels (ISO 11898-2)
- 符合CAN规范2.0 A/B 和 FD
- CAN FD支持ISO和Non-ISO标准
- CAN FD比特率(数据域最大64位)从25 kbit/s至12 Mbit/s
- CAN比特率从25 kbit/s至1 Mbit/s
- NXP TJA1044GT CAN收发器
- 状态指示灯有2个彩色LED
- 连接经由2个9-pin D-Sub连接器或者1个10-pole螺钉端子板 (Phoenix)
- RS-232连接器用于串行数据传输
- I/O-连接:
- 1路数字输入 (low-active)
- 1路数字输出 (Low-side switch, max. 600 mA)
- 2路附加数字输入二选一至RS-232 (low-active)
- 铝合金外壳,可选DIN导轨固定
- 供电电压从8至30 V
- 扩展工作温度范围从-40 to 85 °C
- 新固件可通过CAN接口加载
- 通过CAN转移固件,需要PEAK CAN接
系统要求
- Windows® 10 and 8.1(32/64-bit)
- 关于CAN总线连接:从PC到PEAK-System的CAN接口(例如PCAN-USB)
发货清单
- PCAN-Router FD,铝合金外壳
- Windows开发软件(Yagarto GNU ARM工具链、flash program)
- DVD包含库、例程、和使用手册(PDF格式)
订货号
说明 | 编号 |
---|---|
PCAN-Router FD带D-Sub连接器 | IPEH-002214 |
PCAN-Router FD带Phoenix连接器 | IPEH-002215 |
资料下载