- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
T3419 RS485 Output Temperature and Humidity Transmitter with External Probe

T3419
Humidity and temperature transmitter with T+RH probe on cable. Can be used both indoors and outdoors.
The cables are equipped with humidity and temperature probes. Measurements can also be converted to other humidity interpretations: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific heat.
The device comes with a 1 m long cable for the T+RH probe.
Warranty: 3 years
- Technical Parameters
- Delivery list
Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)
Temperature Sensor
Measurement range: -30 to +105 °C
Measurement accuracy: ±0.4°C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 0 to 100 % relative humidity
Measurement accuracy: ±2.5 % relative humidity (5 to 95 % at 23 °C)
Resolution: 0.1% Relative Humidity
outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.5 °C at ambient temperature T 30 %.
Resolution: 0.1 °C
General Technical Data
Operating temperature: -30 to +80 °C
Channel: 1 connectable temperature and humidity probe
Measurements: Dew point, Absolute humidity, Specific humidity, Mixing ratio, Specific heat
Output: RS485
Humidity sensor temperature compensation range: covers all temperature ranges
Available temperature units: degrees Celsius, degrees Fahrenheit
Communication protocols: ModBus RTU, ARION, Advantech ADAM
Battery: 9-30 Vdc
Protection level: IP65 for electronic equipment; IP40 for sensors.
Size: 88.5 x 145 x 39.5 mm; External probe length/diameter 88/18 mm
External probe cable length: 1 m
Weight: approx. 210 g
Warranty: 3 years
T3419
- Operator's Manual
- Traceable calibration certificate
- Free software for configuring the transmitter TSensor