- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro Basic L-雙半柔性溫度傳感器
TrackSense Pro Basic L Wireless Data Logger
雙半柔性溫度傳感器
雙半柔性溫度傳感器配備了半柔性的雙不銹鋼傳感器。此功能可以輕松控制定位並將傳感器固定到某個測量點，因為半柔性傳感器在彎曲時將保持固定。該傳感器的溫度範圍為 -30 °C 至 +85 °C ，精度為 ± 0.1 °C （在 -30 °C 至 +85 °C 範圍內）。
高質量無線 TrackSense Pro Basic L數據記錄器儀 由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
The TrackSense Pro DataCORDER series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 雙半柔性溫度傳感器 | Recorders with this sensor configuration: | PRO BASIC L 3G |
|---|---|---|---|
| Temperature measurement range: | -30 to +85°C | Working temperature: | -30 to +85°C |
| Measurement Principle: | Resistance | Operational pressure: | 0.001 mBar 至10 Bar ABS |
| Sensor element: | Pt1000 | Surface material: | 316 Liter Stainless Steel |
| 直徑： | 1.5 /2 mm | Diameter of the logger: | 25mm |
| 長度： | 100至1000 mm | Recorder length: | 68.8mm |
| Measurement point from the tip position: | 3 mm | With battery weight: | 80g |
| Precision: | Memory capacity: | 120000個數據點/60000個樣本值 | |
| -30 to +105°C: | ± 0.1 °C | Minimum sampling rate: | 1s |
| Sensor response time: | Maximum sampling rate: | 24h | |
| T-63%: | 0.6 / 0.4 s | Maximum startup delay: | 14 days |
| T-90%: | 0.7 / 0.8 s | Benan: | Not ATEX certified |
| Time accuracy: | ±5s/24h | ||
| Battery: | TSP Standard Battery |
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications
cold store
Refrigeration is used to prevent further biological activity, such as spoilage of food and medical products.The key parameter for the storage period is temperature, but often humidity is also monitored to understand drying conditions.
Environmental Test Room
Environmental test chambers are suitable for a variety of applications: product shelf-life, stability and packaging testing, light and temperature assessment studies, electronic component aging, plant growth, and more.
They are characterized by precise control of parameters such as temperature and relative humidity.
Hydrogen Peroxide
Hydrogen peroxide sterilization is a low-pressure, low-temperature, non-toxic process used in the pharmaceutical and medical industries to reduce the level of infectious agents. This process is preferred for products that cannot withstand the heat of a typical high-pressure sterilizer or have space for diffusion limitations, such as low-lumen medical equipment.
Key parameters include pressure/vacuum, transmitted RF energy, H2O2 concentration and temperature. Humidity can also be measured.
