• Local monitoring, real-time reading, recording, sending and displaying of LIN data.
• Supports LIN device diagnostics and DTL (Diagnostic Transport Layer) such as 3C/3D services.
• Local modification and testing of all control parameters, message signals, frame timing, program timing
• The Baby-LIN-II LIN bus transceiver supports baud rates up to 200K. Although standard LIN devices support up to 20K, there are a growing number of high-speed LIN devices that exceed 20K communication rates, use non-LIN standard protocols, or are swiping a node at a higher baud rate, and require a supporting device to monitor and communicate. Baby-LIN-II can realize these applications in ASCII-Mode.
• One price covers the functionality of many devices on the market: such as LIN Bus Emulator, LIN Bus Diagnostic, LIN Bus Tester, LIN Bus Analyzer, LIN Bus Adapter, etc...
• Master-slave simulation and analysis of LIN nodes/systems to simulate bus participants that do not actually exist. For example, it simulates ECUs and other outgoing data, and supports virtual simulation, semi-physical simulation, and "listen-only" mode.
• Supports event-based signal configuration, sequence control, error determination, and triggering actions.
• Trigger actions to be performed (e.g. run or stop, send another message, change a signal value, etc.) by various event triggering conditions (signal events, message frame events, changed events, etc.)
• Signal events include the result of comparison between signal values, the result of comparison between signal values and constants, and the range of signal changes.
• Frame events include selected frames appearing on the bus, errors in frames (e.g. checks and errors, nodes not responding, etc.)
• Changed events include a change in a signal value, or a change in a message frame.
• Typical tests include: for example, when the product under test has an abnormality, detecting the error through LIN telegrams and stopping the equipment or triggering the sending of a certain command by Baby-LIN-II; for example, after a fixed period of time, starting the cycle of testing for 8,000 times: forward and backward rotation, start-up operation, different angles of openness, etc.; for example, when the production line workers activate Baby-LIN-II. For example, a production line worker activates the Baby-LIN-II module to automatically complete a series of tests before the product is shipped out of the factory: from startup to running to stopping the continuous test.

• CPU: ARM Cortex-M4 CPU
• Memory: 1 MByte SRAM, 64 kBit FRAM
• 0 interface, electrically isolated between USB and LIN buses
• 5-Pin-USB Connector, Type B-Mini, with a 5 meter USB Cable
• SD-card slot with SDHC support (max. cards with 32 GB),FAT-16/32
• Internal real-time clock
• Supply Voltage: 8-28 VDC
• Power consumption: 60 mA@ 24 V
• Switchable 12V output via one switch.
• Environmental conditions: -25° - +70° C
• Protection level: IP20
• Dimensions [mm]: 190 x 95 x 40 (L x W x H)
• Weight: 0,500 kg

Harp-5 is available in different configurations. If you only need to use the LIN bus, then you can order the basic module only. If you only need to use the LIN bus, then you can just order the basic module. If you need to use other functions later, then you only need to support the cost of the part of the function that you purchase again.