- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
T6440 Temperature, Humidity, CO2 Concentration Transmitter, RS485 Output

T6440
Temperature, humidity, CO2 level transmitter. Indoor and outdoor use
Green LED flashing - CO2 concentration from 0 to 1000 ppm
Yellow LED blinking - CO2 concentration of 1001 to 1200 ppm
Red LED blinking - CO2 concentration of 1201 ppm and above
Warranty: 3 years
- Technical Parameters
- Delivery list
Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)
carbon dioxide CO2
Temperature Sensor
Measurement range: -10 to +50 °C
Measurement accuracy: ±0.5°C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 5 to 95 % relative humidity
Measurement accuracy: ±2.5 % relative humidity
Resolution: 0.1% Relative Humidity
outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.6 °C at ambient temperature T 30 %.
Resolution: 0.1 °C
Carbon Dioxide Sensor
Measurement range: 0 to 2000 ppm
Measurement Accuracy: ± (50ppm + 2% of reading), Temperature 25°C, Air Pressure 1013hPa
Resolution: 1 ppm
General Technical Data
Operating temperature: -30 to +60 °C
Channel: Built-in temperature, humidity and carbon dioxide sensors
Measurements: Dew point, Absolute humidity, Specific humidity, Mixing ratio, Specific heat
Humidity sensor temperature compensation range: covers all temperature ranges
Output: RS485
Communication protocol: ModBus RTU, ARION, Advantech ADAM
Battery: 9-30 Vdc
Protection level: IP30 for electronic devices; IP40 for sensors.
Dimensions: 88.5 x 170 x 39.5 mm; stem length 75 mm
Weight: approx. 150 g
Warranty: 3 years
- T6440
- Operator's Manual
- Traceable calibration certificate
- Free software for configuring the transmitter TSensor