Search

T7411 Industrial Temperature, Humidity and Atmospheric Pressure Sensor - RS485 Output

T7411

Temperature, humidity, atmospheric pressure transmitter with T+RH probe on unit cable.

Humidity and temperature sensors are located at the probe on the cable. Measurements can also be converted to other humidity interpretations: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific heat. Built-in pressure sensor.

The device comes with a T+RH probe with 1 meter cable.

Warranty: 3 years

Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)
Air Pressure
Temperature Sensor
Measurement range: -30 to +105°C
Measurement accuracy: ±0.4°C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 0 to 100 % relative humidity
Measurement accuracy: ±2.5 % relative humidity (5 to 95 % at 23 °C)
Resolution: 0.1% Relative Humidity
outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.5 °C at ambient temperature T 30 %.
Resolution: 0.1 °C
Atmospheric Pressure Sensor
Measurement range: 600 to 1100 hPa
Measurement accuracy: ±1.3 hPa (23 °C, 800 to 1100 hPa)
Resolution: 0.1 hPa
General Technical Data
Operating temperature: -30 to +80 °C
Channel: Built-in atmospheric pressure sensor, 1 connectable temperature + humidity probe
Measurements: Dew point, Absolute humidity, Specific humidity, Mixing ratio, Specific heat
Output: RS485
Humidity sensor temperature compensation range: covers all temperature ranges
Available temperature units: degrees Celsius, degrees Fahrenheit
Communication protocols: ModBus RTU and Advantech ADAM compatible protocols
Battery: 9-30 Vdc
Protection level: IP54 for electronic equipment; IP40 for sensors.
Size: 88.5 x 114 x 39.5 mm; external probe length/diameter 88/18 mm
External probe cable length: 1 m
Weight: approx. 210 g
Warranty: 3 years


  • T7411
  • Operator's Manual
  • Traceable calibration certificate
  • Free software for configuring the transmitter TSensor

Contact Hongke to help you solve your problems.

Let's have a chat