- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro XL-自動標記
TrackSense Pro XL 無線數據記錄儀
自動標記
AutoMarker 傳感器可用於記錄會話期間的事件。啟動時，可以通過手動激活電纜末端的開關或在使用 PLC 繼電器功能直接連接到 PLC 時自動將時間標記添加到會話中。
將使用 AutoMarker 的應用程序示例包括：
- 從高壓釜控制器記錄保持時間開始/停止
- 記錄倉庫存儲、穩定室、冷凍機、培養箱等中的開門情況。
- 記錄過程中關鍵部件的一般故障，例如泵故障
- 在冷凍幹燥機中記錄緊急擱板冷卻激活
高質量無線 TrackSense Pro XL數據記錄儀由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
TrackSense Pro XL數據記錄儀系列配備可互換傳感器選項，可解鎖多個測量參數：
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 自動標記傳感器 | Recorders with this sensor configuration: | PRO XL 3G |
|---|---|---|---|
| 工作原理： | 無觸點開關感應器 | Working temperature: | +5 至+50°C |
| 開關電纜插頭類型： | LEMO | Operational pressure: | 0.9 mBar 至1.1 Bar ABS |
| 每個感測器的開關數量： | 1 | 工作濕度： | 10-95% |
| 開關感測器電纜長度： | 100 cm | Surface material: | 316 Liter Stainless Steel |
| IP類： | 40 | Diameter of the logger: | 25mm |
| Recorder length: | 68.8mm | ||
| With battery weight: | 80g | ||
| Memory capacity: | 120,000 data points / 120,000 sample values | ||
| Minimum sampling rate: | 1s | ||
| Maximum sampling rate: | 24h | ||
| Maximum startup delay: | 14 days | ||
| Benan: | Ex II1GD Ex ia IIC T3 Ga，-55 °C ≤ Tamb ≤ +105 °C | ||
| Time accuracy: | ±5s/24h | ||
| Battery: | TSP Standard Battery | ||
| 請注意：如果設備在ATEX 環境中使用，則必須考慮ATEX 憑證第17 節中規定的安全使用的特殊條件。 | |||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
