- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro-雙半柔性溫度傳感器
雙半柔性溫度傳感器
雙半柔性溫度傳感器配備了半柔性的雙不銹鋼傳感器。此功能可以輕松控制定位並將傳感器固定到某個測量點，因為半柔性傳感器在彎曲時將保持固定。該傳感器的溫度範圍為 -50 °C 至 +150 °C，精度為 ± 0.1 °C（在 -40 °C 至 +150 °C 的範圍內）。
The TrackSense Pro DataCORDER series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 雙半柔性溫度傳感器 | Recorders with this sensor configuration: | LAN 3G |
|---|---|---|---|
| Temperature measurement range: | -50 至+150°C | Working temperature: | -50 至+150°C |
| Measurement Principle: | Resistance | Operational pressure: | 0.001 mBar 至10 Bar ABS |
| Sensor element: | Pt1000 | Surface material: | 316 Liter Stainless Steel |
| 直徑： | 1.5 /2 mm | Diameter of the logger: | 25mm |
| 長度： | 100至1000 mm | Recorder length: | 44mm |
| Measurement point from the tip position: | 3 mm | With battery weight: | 48g |
| Precision: | Memory capacity: | 120000個數據點/60000個樣本值 | |
| -50 至-40°C： | ± 0.2 ℃ | Minimum sampling rate: | 1s |
| -40 至+150°C： | ± 0.1 °C | Maximum sampling rate: | 24h |
| Sensor response time: | Maximum startup delay: | 14 days | |
| T-63%: | 0.5 / 0.4 s | Benan: | Ex II1GD Ex ia IIC T3 Ga，-50 °C ≤ Tamb ≤ +105 °C |
| T-90%: | 0.7 / 0.8 s | Time accuracy: | ±5s/24h |
| Battery: | TSP Standard Battery | ||
| 請注意：如果設備在ATEX 環境中使用，則必須考慮ATEX 憑證第17 節中規定的安全使用的特殊條件。 | |||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications
環境試驗箱
Environmental test chambers are suitable for a variety of applications: product shelf-life, stability and packaging testing, light and temperature assessment studies, electronic component aging, plant growth, and more.
They are characterized by precise control of parameters such as temperature and relative humidity.
環氧乙烷滅菌
環氧乙烷滅菌是一種用於製藥和醫療行業的低溫工藝，用於降低傳染源的水平。對於無法承受典型高壓滅菌器高溫的產品，首選此製程。關鍵參數包括溫度、濕度和壓力水平。
Hydrogen Peroxide
Hydrogen peroxide sterilization is a low-pressure, low-temperature, non-toxic process used in the pharmaceutical and medical industries to reduce the level of infectious agents. This process is preferred for products that cannot withstand the heat of a typical high-pressure sterilizer or have space for diffusion limitations, such as low-lumen medical equipment.
Key parameters include pressure/vacuum, transmitted RF energy, H2O2 concentration and temperature. Humidity can also be measured.
蒸氣滅菌
製藥和醫療行業的高壓滅菌器必須符合既定的標準和規範（EN 285 和 ISO 17665），以確保其製程持續提供安全和無菌的結果。
為此，高壓滅菌器需要定期進行鑑定和驗證，以證明它們可以在合格的參數範圍內進行滅菌。
