- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
100/1000BASE-T1 SFP Module H-MTD
Conversion between 100/1000BASE-T1 (Ethernet on board, H-MTD) and SGMII interfaces
The 100/1000BASE-T1 SFP Module H-MTD product is a 100/1000BASE-T1 Car Ethernet SFP module that provides a seamless data transfer conversion between 100/1000BASE-T1 Car Ethernet and SGMII interfaces for devices with SFP+ ports.
It has four DIP switches for multiple functions and can be used with other devices.
Functional overview


Conversion between in-vehicle Ethernet and SGMII interfaces
Four DIP switches for easy access to multiple functions.
This product provides a reliable solution for devices with SFP+ ports to switch between using 100/1000BASE-T1 onboard Ethernet ECUs and SGMII interfaces.
When plugged into an approved device, it configures itself to 100/1000BASE-T1 after powering up.The product features four DIP toggle switches that enable the following functions:
- Dip switch no.1: Master/Slave setting
- Dip switch no.2: lOO/lOOOMbps
- Dip switch no.3: lEEE/Legacy mode
- Dip switch no.4: single/multiple shot mode

Seamless Ethernet Conversion
The product can access the registers of the integrated transceiver through the I2C interface for diagnostics and reconfiguration.

Intelligent, easy-to-manage solutions
The products work seamlessly with our Media Gateway or Enhanced Ethernet Switch (EES), as well as other third-party devices.
The 100/1000BASE-T1 SFP MODULE H-MTD product provides a seamless data transfer solution between 100/1000BASE-T1 Car Ethernet and SGMII interfaces for devices with SFP+ ports. Seamless data transfer between 100/1000BASE-T1 on-board Ethernet and SGMII interfaces. Features four DIP switches for versatile functionality and can be used with other devices.
Specification
Product Code
Product Use Cases
Specification
- Conversion between 100/1000BASE-T1 and SGMII
- Marvell 88Q2112 A2 PHY
- Standard SFP+ slot
- Power requirements: 3.3VDC
- Supports 12C internal register access
- Status LED
- 4 DIP switches for selecting Master/Slave, 100/1000Mbps, IEEE/Legacy modes and single/multiple transmitter settings
- Size: 68×14×14mm
Product Code
Item No. : HK-TE-1440
Product Use Cases
Product Recommendation