- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
TrackSense Pro X-Automatic Marker
TrackSense Pro X Wireless Data Logger
Automatic marking
The AutoMarker sensor can be used to record events during a session. When activated, time stamps can be added to the session either by manually activating a switch at the end of the cable or automatically when connected directly to a PLC using the PLC relay function.
Sample applications that will use AutoMarker include:
- Record hold time start/stop from autoclave controller
- Records openings in warehouse storage, stabilization chambers, freezers, incubators, and more.
- Recording of general failures of critical components during the process, e.g. pump failures
- Record Emergency Shelf Cooling Activation in a Freeze Dryer
The high-quality wireless TrackSense Pro X data logger is made of high-strength stainless steel and offers high-end technology for stable and high-precision measurements in different thermal processes.
The TrackSense Pro X data logger series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The data logger can
| Sensors with this logger configuration: | Automatic Marking Sensor | Recorders with this sensor configuration: | LAN 3G |
|---|---|---|---|
| How it works: | Tactless Switch Sensor | Working temperature: | +5 to +50°C |
| Switches the type of cable plug: | LEMO | Operational pressure: | 0.9 mBar to 1.1 Bar ABS |
| Number of switches per sensor: | 1 | Work Humidity: | 10-95% |
| Switches off the length of the sensor cable: | 100 cm | Surface material: | 316 Liter Stainless Steel |
| IP Class: | 40 | Diameter of the logger: | 25mm |
| Recorder length: | 44mm | ||
| With battery weight: | 48g | ||
| Memory capacity: | 120,000 data points / 120,000 sample values | ||
| Minimum sampling rate: | 1s | ||
| Maximum sampling rate: | 24h | ||
| Maximum startup delay: | 14 days | ||
| Benan: | Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C | ||
| Time accuracy: | ±5s/24h | ||
| Battery: | TSP Standard Battery | ||
| Please note: If the equipment is to be used in an ATEX environment, the special conditions for safe use specified in section 17 of the ATEX Certificate must be taken into account. | |||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
