- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
TrackSense Pro XL-溫度熱電偶傳感器

TrackSense Pro XL Wireless Data Logger
Temperature Thermocouple Sensors
Ellab 獨特的溫度熱電偶傳感器 (TC Sensor) 現在允許全球用戶將熱電偶與無線數據記錄器結合使用。溫度熱電偶傳感器專為對傳感器造成很大壓力且對樣品影響盡可能小的應用而設計。所述應用的一個很好的例子是凍幹,也稱為冷凍幹燥。
高質量無線 TrackSense Pro XL 數據記錄儀由高強度不銹鋼制成,並提供高端技術,可在不同的熱過程中進行穩定和高精度的測量。
The TrackSense Pro XL data logger series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
- Technical Parameters
Sensors with this logger configuration: | Temperature Thermocouple Sensors | Recorders with this sensor configuration: | PRO XL 3G |
---|---|---|---|
Temperature measurement range: | -80 至+62 °C(從-60 至+60 °C 校準) -196 至+400 °C,當記錄器保持在環境溫度並使用適當的熱電偶線時 | Working temperature: | -80 至+62°C |
Measurement Principle: | Thermoelectric effect | Operational pressure: | 0.001 mBar to 10 Bar ABS |
Sensor element: | Thermocouple | Surface material: | 316 Liter Stainless Steel |
Precision: | ± 0.3 °C calibration | Diameter of the logger: | 25mm |
Measurement point from the tip position: | 0 mm | Recorder length: | 68.8mm |
Cable length: | 10, 30, 50 or 100 cm | With battery weight: | 80g |
Cable size and type: | 0.55 x 0.95 mm Type AWG30 with Bare Tip | Memory capacity: | 120,000 data points / 40,000 sample values |
Sensor response time: | Minimum sampling rate: | 1s | |
T-63%: | 0.03 s | Maximum sampling rate: | 24h |
T-90%: | 0.09 s | Maximum startup delay: | 14 days |
*Requires ValSuite® 5.1.0.11 or higher and Recorder firmware version 26.9 or higher. | Benan: | Ex II1GD Ex ia IIC T3 Ga, -55 °C ≤ Tamb ≤ +105 °C | |
Time accuracy: | ±5s/24h | ||
Battery: | TSP Standard Battery | ||
Please note: If the equipment is to be used in an ATEX environment, the special conditions for safe use specified in section 17 of the ATEX Certificate must be taken into account. |
Sensor Options
4 Bar Pressure Sensor
6 Bar Pressure Sensor
8 Bar Pressure Sensor
Bowie Dick Sensor
Semi Flexible High Temperature Sensor
Automarker
Conductivity and Temperature Sensor
Double Rigid Temperature Sensor
Double Semi Flexible High Temperature Sensor
Double Semi Flexible Temperature Sensor
Double SmartFlex Temperature Sensor
High Range Conductivity and Temperature Sensor
Internal Temperature Sensor
Pressure and Rigid Temperature Sensor
Relative Humidity and Temperature Sensorture Sensor
Rigid High Temperature Sensor
Rigid Multipoint Temperature Sensor
Rigid Temperature Sensor
Rigid and SmartFlex Temperature Sensor
Rugged Flexible Temperature Sensor
Semi Flexible Temperature Sensor
SmartFlex Temperature Sensor
Temperature Thermocouple Sensor
Vacuum Sensor
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system

Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications

Freeze-drying
冷凍乾燥是一種用於從溶液中除去水以留下更穩定的「乾燥產品」的技術。該技術包括使用極低的溫度將產品冷凍在架子上,施加真空,然後緩慢加熱產品以確保冰變成蒸汽以去除水分。
The key parameters of the process are temperature (product and shelf) and pressure/vacuum.

UHT and HTST Pasteurized bacteria
UHT and HTST pasteurization are highly regulated heat treatment processes that primarily sterilize liquid products (usually food) prior to packaging.The goal of heat treatment is to sterilize foods and beverages such as milk, juices, condiments and yogurt, while ensuring that they retain their organoleptic appeal and become storage-resistant.