- Home
- Technical Products
High-Performance Data and Automation
ADAS Simulation and Testing Framework
Signal Analysis and Sensing
In-Vehicle Network Communications
Industrial Internet of Things and Digital Factories
AI Machine Vision
Pharmaceutical Cold Chain and Environmental Monitoring
Laboratory Automation and Microfluidics
Environmental Monitoring and Facility Management
Critical Infrastructure Communications and Remote Collaboration
Professional Electronic Testing and Measurement
- Solutions
High-Performance Data and Automation
ADAS Simulation and Testing Framework
In-Vehicle Network Communications
Signal Analysis and Sensing
Industrial Internet of Things and Digital Factories
AI Machine Vision
Pharmaceutical Cold Chain and Environmental Monitoring
Laboratory Automation and Microfluidics
Environmental Monitoring and Facility Management
Critical Infrastructure Communications and Remote Collaboration
- Latest Case Studies
- About Us
EN
Microfluidic Measurement and Inspection Equipment
Based on patented aerospace-inspired piezoelectric technology
Microfluidic Measurement and Inspection Equipment
Our modules can be used with pressure controllers or plugged into a flow reader as a stand-alone instrument. Design a monitoring solution that best suits your needs and control it on your PC with our software.
Utilize our 5 different flow sensors for simultaneous pressure and flow control on the same instrument. Monitor the pressure at a point in the setup using 5 different pressure sensors.
MFS Standard Flow Sensor
Heat Flow Rate Sensor
- 6 sensors to read water flow from 0.007 to 40,000 µL/min.
- For use with our sensor readers or flow controllers.
- High accuracy, typically 5% of measured value
BFS Advanced Flow Sensor
The leader in flow sensors
- Accuracy up to 0.2% (our standard BF1 is 2%)
- Wide flow range from uL/min to mL/min with one sensor
- Compatible with liquids and gases, directly compatible without calibration
MBD Bubble Detector
Fluid Interface Optical Microfluidic Detector
- Liquid interface detection based on true/false logic
- Detect and prevent air bubbles before they cause problems.
MPS Pressure Sensor
Low Volume Pressure Sensor
- Measurement of pressure at any position of the setting
- For use with our sensor readers or pressure controllers.
- 5 sensors with a pressure range of -1 bar to 7 bar
- High accuracy down to 0.2% full scale
MFP Online Pressure Sensor
Large Range Pressure Sensor
- Measurement of pressure at any position of the setting
- For use with our sensor readers or pressure controllers.
- Wide pressure range, 0 to 16 bar in a single browser
- High accuracy up to 2 % FS
MSR Sensor Reader
Low Volume Pressure Sensor
- Measurement of pressure at any position of the setting
- For use with our sensor readers or pressure controllers.
- 5 sensors with a pressure range of -1 bar to 7 bar
- High accuracy down to 0.2% full scale
We offer one-stop microfluidics solutions
Comprehensive technical solutions ranging from basic research and nanoparticle synthesis to cell culture and organ-on-a-chip technology
Basic Research
Microfluidic Droplet Generation Solutions
Research on droplet generation has advanced rapidly in recent years, primarily due to the significant advantages of this technology, particularly for high-throughput single-cell analysis. It is widely used in drug discovery and diagnostics, food and cosmetics production, and industrial applications such as paint manufacturing. Compared to traditional production technologies, microfluidic droplet generation can significantly reduce costs.
Preparation/Synthesis of Lipid Nanoparticles (LNPs)
Solutions for the Preparation of Lipid Nanoparticles
Based on leading microfluidic technology, we offer two solutions for the preparation of lipid nanoparticles. These solutions are designed to enhance the controllability, reproducibility, and high loading efficiency of nanoparticle preparation through precise fluid control and efficient mixing technology, thereby meeting the standardization requirements for drug delivery.
Solutions for the Synthesis of Lipid Nanoparticles
The microfluidic LNP synthesis solution launched by Hongke Elveflow utilizes a pressure-driven flow control system to successfully overcome the challenges posed by traditional technologies. It offers significant advantages, including greatly improved mixing efficiency, precise particle size control, flexible and adjustable production scale, and high levels of automation and reproducibility.
Cell and Biological Research
Microfluidic Cell Culture Solutions
Microfluidic cell culture is a form of dynamic cell culture performed on a microfluidic chip using a microfluidic system. Microfluidic chips are scaled to the cellular level and offer precise control, high throughput, miniaturization, and automation; as a result, they are widely used in dynamic cell culture.
Research on Organoid Vascularization
Hongke, in collaboration with Cellix, has launched a microfluidic vascular research platform designed specifically for in vitro use. This platform utilizes microfluidic chips to simulate the flow dynamics of human blood vessels under physiological conditions and conduct related research. The microfluidic vascular research system facilitates in-depth investigation of disease mechanisms and the evaluation of vascular drugs.
Organ-on-a-chip
Microfluidic Organ-on-a-Chip Solutions
Microfluidic chip systems can control the diameter of micro-organs at the millimeter or even micrometer level, enhance nutrient exchange, and prevent the death of core cells within the micro-organs. Organ-on-a-chip systems do not need to be reconstructed exactly as whole organs, yet they possess the physiological activity and structural and functional characteristics of natural human organs and tissues, making them excellent alternative models for predicting the human body’s responses to drugs and various external stimuli.
Application Examples
» Hongke Biotech x The University of Hong Kong
Hongke Case Study | Hongke's Microfluidic Technology Supports Single-Cell Imaging at the University of Hong Kong: Precisely Capturing the Dynamics of Cancer Cells
In the field of cancer research, single-cell imaging technology faces a critical technical challenge: how to maintain cell viability under high-flow conditions while achieving precise switching between multiple fluids.
Hongke’s Elveflow microfluidic system successfully addressed a key technical challenge faced by the University of Hong Kong during its research—achieving precise control of high flow rates (100–400 μL/min) and rapid multi-fluid switching while maintaining cell viability. This technological breakthrough not only validates the outstanding performance of Hongke’s Elveflow equipment in high-end scientific research applications but also demonstrates its stability and reliability in complex experimental environments.
Professional technical support from HONGKEI to help you succeed in your project.
As a provider specializing in machine vision and optoelectronic inspection solutions, Avision is also committed to providing you with a range of paid technical services related to this product, aiming to help you succeed in your project in the most cost-effective way. Please contact us if you need technical services related to this product!