- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Latest Articles
- About Us
EN
Titration plate wafers
I. Universal introduction
The titration plate element is in microscope carrier slide format (75.5 mm × 25.5 mm × 1.5 mm) and includes cavities of different shapes and volumes.
Product Type
Nano titration plate
The nanotitration plate has three well arrays with different side lengths. The arrays are 14 × 14 (1.125 μm between wells), 28 × 28 (562.5 μm between wells) and 60 × 60 (281.25 μm between wells) single wells.
18-well wafer
The 18-well wafer (119 μl/well) has the spacing of a 96-well microtitre plate, i.e. 9 mm, and is available in different materials as well as transparent and colored versions. It can be used with an adapter frame in titration plate format, which is used as a special adapter for microfluidic wafers in microscope slide format.
24-well wafer
The 24-well wafer is ideally suited for evaluating different parameters of microfluidic experiments, such as material selection. The crystals are available in a wide range of materials and have 24 wells with a volume of 50 μl each.
65-well wafer
The 65-well wafer (25.9 μl/well) has the spacing of a 384-well plate, i.e., 4.5 mm, and it can be used with microtitre plate-sized adapter frames. The wafer can be used as a source plate for reaction or spotting experiments.
