- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
TrackSense Pro-壓力和剛性溫度傳感器
壓力和剛性溫度傳感器
組合式壓力和剛性溫度傳感器的壓力範圍為 15 mBar 至 6 Bar 絕對值，精度為 ±0.25% 滿量程，溫度範圍為 -20 至 +150 °C，測量精度為 ± 0.05 °C . 它可用於食品、制藥和醫療行業的各種應用。
高質量無線 TrackSense Pro 數據記錄儀由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
The TrackSense Pro DataCORDER series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 壓力和剛性溫度感測器 | Logger with this sensor configuration: | LAN 3G |
|---|---|---|---|
| Pressure measurement range: | 15 mBar 至6 Bar ABS（0 至 +140 °C校準） | Operational pressure: | 0.001 mBar to 10 Bar ABS |
| Measurement Principle: | Pressure Resistance/Resistance | Working temperature: | -20 to +150°C |
| Sensor element: | Strain gauge / Pt1000 | Surface material: | 316 Liter Stainless Steel |
| Precision: | ± 0.25% Full Scale | Diameter of the logger: | 25mm |
| Temperature measurement range: | -20 至+150 °C（校準為0 至+140 °C） | Recorder length: | 44mm |
| Temperature accuracy: | With battery weight: | 48g | |
| 0 至+140°C： | ± 0.05 °C | Memory capacity: | 120,000 個數據點/40,000 個樣本值 |
| Temperature response time: | Minimum sampling rate: | 1s | |
| T-63%: | 0.8 s | Maximum sampling rate: | 24h |
| T-90%: | 1.7 s | Maximum startup delay: | 14 days |
| Benan: | Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C | ||
| Time accuracy: | ±5s/24h | ||
| Battery: | TSP Standard Battery | ||
| Please note: If the equipment is to be used in an ATEX environment, the special conditions for safe use specified in section 17 of the ATEX Certificate must be taken into account. | |||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications
洗衣機消毒機
Sterilizers are used in medical and pharmaceutical applications to prepare items for future autoclaving (e.g. surgical instruments for removing residues such as blood and proteins) or sterilizing (semi-sterilizing) items for later use.
Ethylene oxide sterilization
Ethylene oxide sterilization is a low temperature process used in the pharmaceutical and medical industries to reduce the level of infectious agents.This process is preferred for products that cannot withstand the high temperatures of typical autoclaves.Key parameters include temperature, humidity and pressure levels.
Steam sterilization
High-pressure sterilizers for the pharmaceutical and medical industries must meet established standards and specifications (EN 285 and ISO 17665) to ensure that their processes continue to provide safe and sterile results.
For this reason, autoclaves need to be identified and verified periodically to prove that they can sterilize within the qualified parameters.
