- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro Basic-高範圍電導率和溫度傳感器
TrackSense Pro Basic無線數據記錄儀
高範圍電導率和溫度傳感器
高範圍電導率和溫度傳感器可消毒，電導率範圍為 200 至 2000 µS/cm ，溫度範圍為 0 至 +100 °C。電導率測量適用於工業過程的控制/監測，並驗證受 EN ISO 15883:2009 法規管轄的醫院的洗滌消毒過程。該傳感器可用於以下行業：
- 醫藥行業
- 醫療/醫院
- 發酵
- Food & Beverage
- 制糖業
- 石油化學
- 化學工業
- 發電廠
高質量無線 TrackSense Pro Basic數據記錄儀由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
The TrackSense Pro DataCORDER series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 高範圍電導率和溫度傳感器 | Recorders with this sensor configuration: | LAN 3G |
|---|---|---|---|
| 電導率範圍： | 200 至2000 μS/cm | Working temperature: | 0 至+100°C |
| Measurement Principle: | 電導率/電阻 | Surface material: | 316 Liter Stainless Steel |
| Sensor element: | 電導率/ Pt1000 | Diameter of the logger: | 25mm |
| 連接材質： | Peek（符合FDA 標準） | Recorder length: | 44mm |
| 尺寸長x 深： | 37 mm x 25 mm / 13 mm | With battery weight: | 48g |
| 浸入深度： | 最小25 毫米 | Memory capacity: | 120000個數據點/60000個樣本值 |
| 電導率精度： | ± 1 μS/cm 或讀數的± 2.5 % 以較差者為準 | Minimum sampling rate: | 1s |
| IP類： | IP67 | Maximum sampling rate: | 24h |
| Temperature range: | 0 至+100°C * | Maximum startup delay: | 14 days |
| 溫度精度： | ± 0.05 ℃ | Benan: | Ex II1GD Ex ia IIC T3 Ga，-50 °C ≤ Tamb ≤ +105 °C |
| *電導率感測器不是為蒸氣 滅菌而設計的，但可以在+121 °C 下進行高壓滅菌 | Time accuracy: | ±5s/24h | |
| Battery: | TSP Standard Battery | ||
| 請注意：如果設備在ATEX 環境中使用，則必須考慮ATEX 憑證第17 節中規定的安全使用的特殊條件。 | |||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
