- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
Temperature and humidity meter with external probe

D4141
Thermometers, hygrometers and barometers are designed to measure temperature, relative humidity and atmospheric pressure and record their data into internal non-volatile memory.
Provides barometric trend readings. A free PC program transfers recorded data to a computer for subsequent evaluation.
Audible and visual alarms for temperature measurement.
Minimum and maximum measurements can be saved.
Function Hold - manually stores the actual value for future display.
The instrument is connected to a PC via the supplied USB cable and is only used to transfer data from the memory. Measurement and recording cannot be performed while connected to a computer.
Thermometers, hygrometers and barometers are equipped with an external air temperature and humidity probe with a 1 meter long cable. The probe is 18 mm in diameter and 135 mm in length. Built-in indoor temperature and air pressure sensors.
Warranty: 3 years
- Technical Parameters
- Delivery list
Measurement parameters
Temperature
Relative Humidity
Atmospheric Pressure
Temperature Sensor
Measurement range: -10 to +60 °C (internal); -30 to +105 °C (external)
Measurement accuracy: ±0.4 °C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 0 to 100 % relative humidity
Measurement accuracy: ±2.5 % RH (5 to 95 % at 23 °C)
Resolution: 0.1% Relative Humidity
outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.5 °C at ambient temperature T 30 %.
Resolution: 0.1 °C
Atmospheric Pressure Sensor
Measurement range: 800 to 1100 hPa
Measurement accuracy: ±2hPa at 23°C
Resolution: 0.1 hPa
General Technical Data
Operating temperature: -10 to +60 °C for electronic devices, -30 to +105 °C for external probes
Channel: Internal temperature and atmospheric pressure sensors, 1 connectable temperature and humidity probe
Audio Signal + Backlight LCD: Yes
Total storage capacity: 16,000 values in non-cyclic recording mode
Recording interval: adjustable from 10 seconds to 24 hours
Measurement interval and display reading refresh: 0.7 to 5 seconds
Data logging modes: Non-cyclic - stops logging when the memory is full; cyclic - the earliest data is overwritten with new data after the memory is full
Real-time clock: year, leap year, month, day, hour, minute, second
Battery: 9 V or 12 V power adapter with 9 V Ni-MH battery
Battery life: approx. 6 months
Protection level: IP20
Dimensions (without connector): 191 x 71 x 27 mm; external probe length/diameter 135/18 mm
External probe cable length: 1 m
Weight (including battery): approx. 155 g
Warranty: 3 years
- D4141
- Operator's Manual
- Traceable calibration certificate
- 9 V Battery
- Mini USB Cable
- Plastic Transportation Box
- Easy to install self-adhesive double locks
- Free analysis software COMET Vision
