Search

Temperature and humidity meter with external probe

D4141

Thermometers, hygrometers and barometers are designed to measure temperature, relative humidity and atmospheric pressure and record their data into internal non-volatile memory.

 

Provides barometric trend readings. A free PC program transfers recorded data to a computer for subsequent evaluation.

 

Audible and visual alarms for temperature measurement.

Minimum and maximum measurements can be saved.

Function Hold - manually stores the actual value for future display.

 

The instrument is connected to a PC via the supplied USB cable and is only used to transfer data from the memory. Measurement and recording cannot be performed while connected to a computer.

 

Thermometers, hygrometers and barometers are equipped with an external air temperature and humidity probe with a 1 meter long cable. The probe is 18 mm in diameter and 135 mm in length. Built-in indoor temperature and air pressure sensors.

Warranty: 3 years

Measurement parameters
Temperature
Relative Humidity
Atmospheric Pressure


Temperature Sensor
Measurement range: -10 to +60 °C (internal); -30 to +105 °C (external)
Measurement accuracy: ±0.4 °C
Resolution: 0.1 °C


Humidity Sensor
Measurement range: 0 to 100 % relative humidity
Measurement accuracy: ±2.5 % RH (5 to 95 % at 23 °C)
Resolution: 0.1% Relative Humidity


outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.5 °C at ambient temperature T 30 %.
Resolution: 0.1 °C


Atmospheric Pressure Sensor
Measurement range: 800 to 1100 hPa
Measurement accuracy: ±2hPa at 23°C
Resolution: 0.1 hPa


General Technical Data
Operating temperature: -10 to +60 °C for electronic devices, -30 to +105 °C for external probes
Channel: Internal temperature and atmospheric pressure sensors, 1 connectable temperature and humidity probe
Audio Signal + Backlight LCD: Yes
Total storage capacity: 16,000 values in non-cyclic recording mode
Recording interval: adjustable from 10 seconds to 24 hours
Measurement interval and display reading refresh: 0.7 to 5 seconds
Data logging modes: Non-cyclic - stops logging when the memory is full; cyclic - the earliest data is overwritten with new data after the memory is full
Real-time clock: year, leap year, month, day, hour, minute, second
Battery: 9 V or 12 V power adapter with 9 V Ni-MH battery
Battery life: approx. 6 months
Protection level: IP20
Dimensions (without connector): 191 x 71 x 27 mm; external probe length/diameter 135/18 mm
External probe cable length: 1 m
Weight (including battery): approx. 155 g
Warranty: 3 years

  • D4141
  • Operator's Manual
  • Traceable calibration certificate
  • 9 V Battery
  • Mini USB Cable
  • Plastic Transportation Box
  • Easy to install self-adhesive double locks
  • Free analysis software COMET Vision

Contact Hongke to help you solve your problems.

Let's have a chat