- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
多功能數據記錄儀 – 2路MiniDIN輸入和2路熱電偶輸入的溫濕度計

M1220
通用型數據記錄器,有 4 個輸入端。兩個輸入用於溫濕度探頭,兩個用於輸入熱電偶 K、J、S、B、T、N。
The multifunction data logger can be permanently installed on an Ethernet network or used as a portable device.
A traceable calibration certificate to EN ISO/IEC17025 is included.
The Multi-Function Data Logger is a battery-powered data logger capable of measuring and recording sensor and electrical values through its inputs.
The multifunctional data logger can be connected to an Ethernet network. Measurements can be viewed on a browser, saved and downloaded for subsequent analysis.
Warranty: 3 years
- Technical Parameters
- Delivery list
Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)
Temperature Sensor - External Probe PT1000
Measurement range: -200 to +600 °C
測量精度:±0.2°C (-200 to +100 °C); 在 +100 至 +600°C 範圍內測量值的 ±0.2%
Resolution: 0.1 °C
溫度+濕度傳感器 – 外置探頭 T+RH DIGI
測量範圍:取決於所連接的探頭 Digi/M
測量精度:取決於所連接的探頭 Digi/M
Resolution: 0.1 °C
outdoor spot
測量範圍:取決於所連接的探頭 Digi/M
測量精度:取決於所連接的探頭 Digi/M
Resolution: 0.1 °C
Temperature Sensor - Thermocouple K, N
Measurement range: -200 to +1300 °C
Measurement accuracy: ±0.3% of measured value with 1.5°C deviation
Resolution: 0.1 °C
Temperature Sensor - Thermocouple J
Measurement range: -200 to +750 °C
Measurement accuracy: ±0.3% of measured value with 1.5°C deviation
Resolution: 0.1 °C
Temperature Sensor - Thermocouple S
Measurement range: 0 to +1700 °C
Measurement accuracy: ±0.3% of measured value with 1.5°C deviation
Resolution: 0.1 °C
Temperature Sensor - Thermocouple B
Measurement range: 100 to +1800 °C
Measurement accuracy: ±0.31 TP3T of the measured value in the range +300 to +1800 °C with 1 °C deviation
Resolution: 0.1 °C
Temperature Sensor - Thermocouple T
Measurement range: -200 to +400 °C
Measurement accuracy: ±0.3% of measured value with 1.5°C deviation
Resolution: 0.1 °C
DC Voltage:
Measurement range: -60 to +140 mV; -18 to +18 mV
Measurement accuracy: ±100 µV; ±20 µV
Resolution: 0.1 µV
General Technical Data
Operating temperature: -10 to +60 °C
Channels: 4 external temperature probes
計數值:露點溫度、絕對濕度、比濕度、混合比、比焓
Total storage capacity: 1,000,000 values in non-cyclic recording mode; 600,000 values in cyclic recording mode
Recording interval: adjustable from 1 second to 24 hours
Display and alarm updates: every 10 seconds
Data logging modes: Non-cyclic - stops logging when the memory is full; cyclic - the earliest data is overwritten with new data after the memory is full
Available Temperature Units: Celsius, Fahrenheit
Communication Interface: Ethernet, USB, RS232
Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK.
Alarm Protocol: Email
Power: AC adapter 230Vac/5Vdc (required for Ethernet interface)
Battery life: 3 - 4 weeks
Protection level: IP20
Dimensions (without connector): 178 x 95 x 37 mm without connection cable
Weight (including battery): approx. 380 g
Warranty: 3 years
- M1200
- Operator's Manual
- Traceable calibration certificate
- 3 AA type rechargeable batteries
- Power supply
- USB-C cable
- Wall Mount Bracket
- Free analysis software COMET Vision
Delivery without external probe