- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
U3430 帶內置傳感器的溫度、濕度和二氧化碳數據記錄儀

U3430
數據記錄儀被設計用於記溫度、濕度和二氧化碳。
Recordings are made in a non-volatile electronic memory. Data can be transferred to a computer via USB-C.
If the set limit is exceeded, an alarm will be generated through the LED, LCD and built-in buzzer.
The device includes a traceable calibration certificate and declares that the calibrator's metrological traceability is based on the EN ISO/IEC 17025 standard.
Warranty: 3 years
- Technical Parameters
- Delivery list
Temperature Sensor
Measurement range: -20 to +60 °C
Measurement accuracy: ±0.4°C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 0 to 100 % RH
Measurement accuracy: ±1.8%RH
Resolution: 0.1 RH
outdoor spot
Measurement range: -60 to +60 °C
Measurement accuracy: ±1.5 °C for ambient temperature T 30 %.
Resolution: 0.1 °C
CO2傳感器
測量範圍:0 至 5000 ppm
測量精度:±(50ppm+讀數的3%),溫度為25°C和1013hPa
Resolution: 1 ppm
General Technical Data
Operating temperature: -20 to +60 °C
通道:內部溫度、濕度、二氧化碳傳感器
Total storage capacity: 500,000 values in non-cyclic recording mode; 350,000 values in cyclic recording mode
Recording interval: adjustable from 1 second to 24 hours
Display and alarm update: 1 second, 10 seconds, 1 minute adjustable
Data logging modes: Non-cyclic - stops logging when the memory is full; cyclic - the earliest data is overwritten with new data after the memory is full
Real Time Clock: Year, Year, Month, Day, Hour, Minute, Seconds
電池: 鋰電池A8200,3.6V/5200mAh
Protection level: IP20
Dimensions: 61 x 93 x 32 mm
重量 (包括電池): 約250 g
Warranty: 3 years
U3430
Operator's Manual
Traceable calibration certificate
Rechargeable Battery
Power supply
USB-C線纜
Free analysis software COMET Vision