- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Resource Center
- About Us
EN
T3319 Industrial Temperature and Humidity Transmitter - RS232 Output

T3319
Humidity and temperature transmitter. Outdoor and indoor use.
Humidity and temperature sensors are located at the probe on the cable. Measurements can also be converted to other humidity interpretations: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific heat.
The device comes with a T+RH probe with 1 meter cable.
Warranty: 3 years
- Technical Parameters
- Delivery list
Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)
Temperature Sensor
Measurement range: -30 to +105 °C
Measurement accuracy: ±0.4°C
Resolution: 0.1 °C
Humidity Sensor
Measurement range: 0 to 100% relative humidity
Measurement Accuracy: ±2.5% relative humidity (5 to 95 % at 23 °C)
Resolution: 0.1 % relative humidity
outdoor spot
Measurement range: -60 to +80 °C
Measurement accuracy: ±1.5 °C at ambient temperature T 30 %.
Resolution: 0.1 °C
General Technical Data
Operating temperature: -30 to +80 °C
Channel: 1 connectable temperature and humidity probe
Measurements: Dew point, Absolute humidity, Specific humidity, Mixing ratio, Specific heat
Output: RS232
Humidity sensor temperature compensation range: covers all temperature ranges
Available Temperature Units: Celsius, Fahrenheit
Communication protocols: ModBus RTU and Advantech ADAM compatible protocols
Battery: 9-30 Vdc
Protection level: IP65 for electronic equipment; IP40 for sensors.
Size: 88.5 x 145 x 39.5 mm; external probe length/diameter 88/18 mm
External probe cable length: 1 m
Weight: approx. 210 g
Warranty: 3 years
- H3319
- Operator's Manual
- Traceable calibration certificate
- Free software for configuring the transmitter TSensor
