- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro XL-相對濕度和溫度傳感器
TrackSense Pro XL 無線數據記錄儀
相對濕度和溫度傳感器
相對濕度和溫度傳感器的溫度範圍為 0 至 +90 °C ，精度為 ± 0.1 °C （範圍為 10 至 +90 °C）。
該傳感器的相對濕度範圍為 0 至 100% RH ，精度為 ± 2% RH （校準範圍為 10 至 90%）。
它可用於制藥行業的應用，特別適合在倉庫、穩定室和 EtO 滅菌過程驗證期間確定濕度水平。
高質量無線 TrackSense Pro XL數據記錄儀由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
TrackSense Pro XL數據記錄儀系列配備可互換傳感器選項，可解鎖多個測量參數：
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 相對濕度和溫度傳感器 | Recorders with this sensor configuration: | PRO XL 3G |
|---|---|---|---|
| RH 測量範圍（0 至+90 °C）： | 0 – 100%（校準10-90%） | Working temperature: | 0 至+90°C |
| Measurement Principle: | 電容感應/電阻 | Operational pressure: | 0.001 mBar 至10 Bar ABS |
| Sensor element: | 電容/Pt1000 | Surface material: | 316 Liter Stainless Steel |
| 25 °C 時的RH 準確度，無冷凝（10% 至90%）： | ± 2% | Diameter of the logger: | 25mm |
| RH解析度： | 0.10% | Recorder length: | 68.8mm |
| RH 反應時間（在緩慢移動的空氣中為63%）： | <15 s | With battery weight: | 80g |
| Temperature measurement range: | 0 至+90 °C（校準10-90 °C） | Memory capacity: | 120000個數據點/60000個樣本值 |
| 溫度精度： | Minimum sampling rate: | 1s | |
| +10 至+90°C： | ± 0.1 °C | Maximum sampling rate: | 24h |
| 溫度解析度： | 0.01℃ | Maximum startup delay: | 14 days |
| 溫度響應時間： | Benan: | Ex II1GD Ex ia IIC T3 Ga，-55 °C ≤ Tamb ≤ +105 °C | |
| T-63%: | 6.5 s | Time accuracy: | ±5s/24h |
| T-90%: | 17 s | Battery: | TSP Standard Battery |
| *需要ValSuite 5.2 或更新版本 | 請注意：如果設備在ATEX 環境中使用，則必須考慮ATEX 憑證第17 節中規定的安全使用的特殊條件。 | ||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications
環境試驗箱
Environmental test chambers are suitable for a variety of applications: product shelf-life, stability and packaging testing, light and temperature assessment studies, electronic component aging, plant growth, and more.
They are characterized by precise control of parameters such as temperature and relative humidity.
環氧乙烷滅菌
環氧乙烷滅菌是一種用於製藥和醫療行業的低溫工藝，用於降低傳染源的水平。對於無法承受典型高壓滅菌器高溫的產品，首選此製程。關鍵參數包括溫度、濕度和壓力水平。
Hydrogen Peroxide
Hydrogen peroxide sterilization is a low-pressure, low-temperature, non-toxic process used in the pharmaceutical and medical industries to reduce the level of infectious agents. This process is preferred for products that cannot withstand the heat of a typical high-pressure sterilizer or have space for diffusion limitations, such as low-lumen medical equipment.
Key parameters include pressure/vacuum, transmitted RF energy, H2O2 concentration and temperature. Humidity can also be measured.
倉庫
製藥、醫療和食品業的倉庫環境可能需要遵守法規，需要驗證和監控。
溫度和濕度是最常見的關鍵參數，它們不能超過某些極限值，需要準確記錄。
