- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
Industrial Internet of Things
- Resource Center
- About Us
EN
TrackSense Pro-真空傳感器
真空傳感器
真空傳感器的壓力範圍為0.001 mBar 至 100 mBar，可以記錄 SIP 階段的溫度水平，其溫度範圍為-50 至 +140 °C。它可用於食品和制藥行業的各種應用，尤其適用於低溫應用，例如凍幹/冷凍幹燥。
高質量無線 TrackSense Pro 數據記錄儀由高強度不銹鋼制成，並提供高端技術，可在不同的熱過程中進行穩定和高精度的測量。
The TrackSense Pro DataCORDER series is equipped with an interchangeable sensor option that unlocks multiple measurement parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative Humidity
✓ Vacuum
✓ Vapor penetration
The DataCORDER can be easily activated and read by multiple readout stations and combined with the Sky Module via wireless communication to obtain real-time data.
| Sensors with this logger configuration: | 真空傳感器 | Recorders with this sensor configuration: | LAN 3G |
|---|---|---|---|
| 壓力/真空測量範圍： | 0.001 mBar至100 mBar（-50 至+80 °C） | Operational pressure: | 0.001 mBar 至10 Bar ABS |
| Measurement Principle: | 皮拉尼/電阻 | Working temperature: | -50 至+140°C |
| Sensor element: | 導熱真空計/Pt1000 | Surface material: | 316 Liter Stainless Steel |
| 壓力/真空精度： | Diameter of the logger: | 25mm | |
| > 0,001 – 0,005 mBar： | ± 0,0005 mBar | Recorder length: | 44mm |
| > 0,005 – 0,01 mBar： | ± 0,003 mBar | With battery weight: | 48g |
| > 0,01 – 0,025 mBar： | ± 0,005 mBar | Memory capacity: | 120,000 個數據點/60,000 個樣本值 |
| > 0,025 – 0,1 mBar： | ± 0,01 mBar | Minimum sampling rate: | 1s |
| > 0,1 – 0,5 mBar： | ± 0,05 mBar | Maximum sampling rate: | 24h |
| > 0,5 – 1,0 mBar： | ± 0,1 mBar | Maximum startup delay: | 14 days |
| > 1,0 – 5,0 mBar： | ± 0,5 mBar | Benan: | Ex II1GD Ex ia IIC T3 Ga，-50 °C ≤ Tamb ≤ +105 °C |
| > 5,0 – 10 mBar： | ± 2 mBar | Time accuracy: | ±5s/24h |
| > 10 – 100 mBar： | ± 20 mBar | Battery: | TSP Standard Battery |
| 壓力/真空感知器響應時間： | 0.002 s | 請注意：如果設備在ATEX 環境中使用，則必須考慮ATEX 憑證第17 節中規定的安全使用的特殊條件。 | |
| Temperature measurement range: | -50 至+140°C | ||
| 溫度精度： | ± 0.5 ℃ | ||
| 溫度感測器響應時間： | <120 s | ||
Sensor Options
Previous
Next
Key Benefits and Features
- One Logger - Multiple Sensor Options
- Conforms to 21 CFR Part 11
- Real-time data of SKY module
- User-friendly verification software
- Works with E-Val Pro thermocouple system
Software
ValSuite software is the industry's leading verification and calibration software and is highly credited with countless reporting options, impeccable data integrity, user calibration options and data analysis capabilities.
The software is used to run all of ELLAB's hardware and can combine various measurement systems into a unified study. In addition to its wide range of features, ValSuite complies with FDA 21 CFR Part 11 and is designed according to the GAMP guidelines. In addition, the software automatically generates PDF reports with clear pass/fail indications and can be run on stand-alone PCs or networked computers.
✓ Complies with FDA 21 CFR Part 11
✓ safe and reliable
✓ Windows Security Options
✓ Compatible with Windows 10
✓ Available in multiple languages
✓ Suitable for various applications
✓ Multiple Reporting Options
- One software platform for all Ellab devices
- Combine TrackSense data logger and E-Val Pro wired thermocouple system in the same session
- Automatic PDF report generation with clear pass/fail indication
- Runs on standalone PC or network
Applications
冷凍乾燥
冷凍乾燥（或冷凍乾燥）是一種用於從溶液中除去水以留下更穩定的「乾燥產品」的技術。該技術包括使用極低的溫度將產品冷凍在架子上，施加真空，然後緩慢加熱產品以確保冰變成蒸汽以去除水分。
該過程的關鍵參數是溫度（產品和貨架）和壓力/真空。
