Search
Free Trial

Multifunctional In-Vehicle Communication Interface

Hongke 100/1000BASE-T1

USB Interface MATEnet

This product is an in-vehicle Ethernet-to-USB 3.1/2.0 network interface card that allows computers without a built-in in-vehicle network card to connect directly to a 100/1000BASE-T1 in-vehicle network and can also function as a USB-CAN (FD) interface. The device integrates in-vehicle Ethernet communication, a CAN bus interface, and advanced diagnostic capabilities, making it suitable for applications such as automotive electronics R&D testing, EOL programming on production lines, in-vehicle network diagnostics, and data acquisition.

  • Dual-Speed In-Vehicle Ethernet NIC: Supports the 100/1000BASE-T1 standard and converts a USB port into an in-vehicle network interface card, enabling a PC to directly access in-vehicle network devices
  • Integrated USB-CAN (FD) Interface: When operating in Ethernet mode, it can simultaneously function as a USB-CAN (/FD) interface, enabling parallel access and data transmission across multiple protocols.
  • Intelligent Configuration and Diagnostics: Supports automatic negotiation or manual configuration of data rates and master/slave modes; provides PC software for status monitoring, parameter configuration, and physical-layer cable diagnostics
  • Industrial-Grade, User-Friendly Design: Features TE MATEnet/H-MTD automotive connectors and a USB Type-C interface; supports USB bus-powered operation and DIN rail mounting; suitable for industrial environments
Quote Now
Product Catalog

Functional overview

The Hongke 100/1000BASE-T1 USB Interface MATEnet enables connectivity between 1000BASE-T1/100BASE-T1 networks and USB ports. When connected to a PC’s USB port, it functions as a standard network interface card and is equipped with a TE MATEnet connector and a USB 3.1 Type-C connector.

This device can connect a 100BASE-T1/1000BASE-T1 ECU or network to a computer without a built-in network card (such as an Ultrabook, Mini PC, etc.). The communication speed and master-slave configuration can be automatically negotiated with the link partner or manually configured by the user. The device supports reading status information and port diagnostic data via a virtual COM port and can also function as a USB-to-CAN(/FD) interface.

Click here to view the original image

Product Details

  • Key Features
  • In-Vehicle Ethernet to USB 3.1/2.0 Network Interface Card
  • Supports the 1000BASE-T1 and 100BASE-T1 protocols
  • 100/1000 Mbit Full-Duplex Communication
  • Master-slave mode can be automatically negotiated or manually configured
  • Supports IEEE standard mode and legacy mode
  • Port T1 supports automatic polarity detection
  • Frame Generator Mode
  • Configuration, status monitoring, and port diagnostics via a USB virtual serial port
  • Offers free PC software
  • Can be used as a USB-to-CAN(/FD) interface
  • Equipped with a USB 3.1 Type-C port
  • Supports USB Bus Power
  • Aluminum alloy housing
  • Supports DIN rail mounting
  • Other Functions
  • The device features built-in status indicators and DIP switches, which provide a visual display of port status and allow for parameter configuration, while also offering advanced features such as a packet generator and cable diagnostics.
  • When connected to a computer's USB 3.x port (backward compatible with USB 2.0), the device can function as a network interface card (automatically adapting to 1000 Mbit/s or 100 Mbit/s transmission rates based on the T1 port speed) and a virtual COM port.
  • The virtual COM port supports programmatic reading of device status and configuration parameters, and can simultaneously enable the USB-to-CAN(/FD) interface function (this function can operate in tandem with the 100/1000BASE-T1 network card function).
  • Based on an open USB protocol, users can read status information and configure port parameters, making it easy to integrate the device with various systems.
  • Hongke also offers a free PC application that can be used for visual status monitoring, parameter configuration, and accessing advanced features.
  • Product Images
B-100_1000BASE-T1-USB-Interface-MATEnet-T1-side-300x187
c-100_1000BASE-T1-USB-Interface-MATEnet-USB-side-300x197
100_1000BASE-T1-USB-Interface-MATEnet-1024x769
A-100_1000BASE-T1-USB-Interface-MATEnet-Top-1024x976

Specification

functionality descriptive
In-Vehicle Ethernet 100/1000BASE-T1 to USB 3.1/2.0 Network Interface Card Note: When connected to a USB 2.0 port, the 1000BASE-T1 data transfer rate will be limited.
Configuration Features
  • Speed Selection: 100/1000/Auto-Negotiation
  • Operating Mode: Master/Slave Mode / Auto-Negotiation
  • Frame Generator: On/Off
  • Link Mode: IEEE Standard/Legacy Mode
Communication Channels
  • In-Vehicle Ethernet: Supports 1000BASE-T1 (IEEE 802.3bp) or 100BASE-T1 (IEEE 802.3bw)
  • CAN Bus: High-speed CAN channel supporting CAN FD (compliant with ISO 11898-1:2015, compatible with CAN 2.0A/B and ISO CAN FD)
  • USB Ports: USB 3.1 network adapter, USB 2.0 CDC diagnostic channel
System Integration Port parameter configuration, status reading, and cable diagnostics can be performed via USB virtual serial ports or the open communication protocol CAN(/FD).
USB-CAN (/FD) Interface When the 100/1000BASE-T1 conversion function is active, it can simultaneously serve as a USB-CAN or USB-CAN FD interface (an open communication protocol based on USB virtual serial ports).
PC Applications Provides free PC utility software that supports status monitoring, converter configuration, cable diagnostics, and USB-to-CAN(/FD) functionality.
Power supply method USB Bus-Powered
Interface Type
  • 1000BASE-T1: TE MATENet Connector
  • CAN Bus: 6-pin terminal block (Molex Micro-Fit specification)
  • USB: USB Type-C port
sizes 84 x 82 x 33 mm
Working Temperature -20 to 70 °C
Installation Method
  • Desktop Mount (includes adhesive pad)
  • DIN rail mounting (bracket sold separately)
*For detailed specifications, refer to the product manual for this equipment.

Other Information

Free PC Apps

Hongke provides a free 100/1000BASE-T1 USB interface along with a PC application

core functionality

  • Real-time port status monitoring: link status, data rate, master/slave mode, signal quality, insertion loss, and return loss
  • Flexible configuration of device parameters: auto-negotiation mode, communication speed, and switching between IEEE and legacy modes
  • Perform Cable Diagnostic Tests
  • Enable USB-CAN(/FD) interface functionality: Configure CAN channel parameters; send and receive CAN and CAN FD data packets

Designed for the Microsoft Windows operating system and developed using the .NET framework

This product provides an open communication protocol that supports access to the media converter via USB or CAN(/FD) channels. The protocol supports remote reading of status information, configuration of T1 port parameters, and enables USB-CAN(FD) interface conversion.

  • 100/1000BASE-T1 USB Interface MATEnet: In-vehicle Ethernet-to-USB interface card equipped with a TE MATEnet connector (Product Number: MH-1001000BT1-USB-M)
  • 100/1000BASE-T1 USB Interface H-MTD: In-vehicle Ethernet-to-USB interface card equipped with a Rosenberger H-MTD connector (Product Number: MH-1001000BT1-USB-H)

Related Products

SAE J2716 Interface

SENT-to-Ethernet / USB / CAN(/FD) Gateways, SENT-to-Analog Converters, Standalone SENT and CAN(/FD) Data Loggers

SENT-USB

Dual-channel SAE J2716-to-USB interface that supports connecting the SENT bus to a computer equipped with a USB port

SENT Bus Gateway

Equipped with two bidirectional SENT channels, two analog output channels, and an RS-232 or CAN bus interface, it is suitable for applications such as SENT communication monitoring and simulation.

In-Vehicle Ethernet
Data Acquisition and Testing Tools

Multifunctional in-vehicle communication interfaces, embedded devices and test and diagnostic tools

Professional technical support from HONGKEI to help you succeed in your project.

We are committed to helping our customers achieve long-term success not only by providing products, but also through professional technical consulting and innovation optimization. By choosing Avision, you are choosing a reliable technology growth partner with international vision and local needs.
 

Testing Services

On-demand sample testing and validation of performance evaluation

Hardware Training

Comprehensive coverage of all aspects of hardware product usage

Software Training

Helps you quickly master the skills of using the software

integrated development

Complete integrated solutions based on requirements
close menu icon

Contact Hongke to help you solve your problems.

Let's have a chat