Measurement parameters
Temperature
Relative Humidity
Count (Dew Point...)

Temperature Sensor - External Probe PT1000
Measurement range: -200 to +600 °C
Measurement accuracy: ±0.2°C (-200 to +100°C); ±0.2% of measured value in the +100 to +600°C range
Resolution: 0.1 °C

Temperature + Humidity Sensor - External Probe T+RH DIGI
Measurement range: depends on the connected probe Digi/M
Measurement accuracy: depends on the connected probe Digi/M
Resolution: 0.1 °C

outdoor spot
Measurement range: depends on the connected probe Digi/M
Measurement accuracy: depends on the connected probe Digi/M
Resolution: 0.1 °C

General Technical Data
Operating temperature: -10 to +60 °C
通道：4個外部溫度探頭或可連接的溫度+濕度探頭
Measurement: Dew point temperature, Absolute humidity, Specific humidity, Mixing ratio, Specific enthalpy
Total storage capacity: 1,000,000 values in non-cyclic recording mode; 600,000 values in cyclic recording mode
Recording interval: adjustable from 1 second to 24 hours
Display and alarm updates: every 10 seconds
Data logging modes: Non-cyclic - stops logging when the memory is full; cyclic - the earliest data is overwritten with new data after the memory is full
Available Temperature Units: Celsius, Fahrenheit
Communication Interface: Ethernet, USB, RS232
Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK.
Alarm Protocol: Email
Power: AC adapter 230Vac/5Vdc (required for Ethernet interface)
Battery life: 3 - 4 weeks
Protection level: IP20
Dimensions (without connector): 178 x 95 x 37 mm without connection cable
Weight (including battery): approx. 380 g
Warranty: 3 years