Search
Free Trial
3-in-1 Hardware Platform

MGA8410

3-in-1 Ethernet Testing and Monitoring Platform

Designed for R&D, testing, and technical support engineers, this solution enables traffic generation, network fault simulation, live packet capture, and protocol analysis on a single 1U hardware platform with four ports.

  • ✓ 10MbE–10GbE, supports IEEE 802.3bz 2.5G/5GBASE-T
  • ✓ Supports BASE-T1 and BASE-RH in-vehicle Ethernet interfaces
  • ✓ Hardware Architecture: Balancing Measurement Accuracy and Line Speed Performance
  • ✓ Intuitive browser interface with a RESTful API
Check Now → View the Product Manual ↗
MGA8410 4-PORT / 1U PLATFORM
虹科 MGA8410 產品圖
4 × SFP+
Fiber Optic / DAC / Copper Cable
1U
Rack-Mounted Hardware Platform
3 Types of Applications
Configure Authorization Based on Test Tasks
Hongke MGA8410 Product Image
10MbE–10GbE
Multi-Rate Ethernet Support
4 × SFP+
4 ports · 1U chassis
28 GB
Hardware Packet Capture Cache
1 ns
Time Delay Measurement Accuracy
PLATFORM OVERVIEW

A single platform,
End-to-End Validation and Issue Reproduction

The MGA8410 is a standalone Ethernet test platform designed for research, development, and deployment in the IT, storage networking, mobile communications, defense, automotive, industrial, and time-sensitive networking (TSN) sectors.

It provides measurement and processing capabilities through its hardware architecture and organizes test tasks via an intuitive interface; with different application licenses, it covers performance validation, network visualization, and on-site troubleshooting.

01
Online Capture and Protocol Analyzer →

Use bidirectional transparent chaining or connect via SPAN/TAP to monitor actual network traffic.

02
Network Failure Simulator →

Connect the system under test in a bidirectional daisy-chain configuration to simulate latency, congestion, and packet-level anomalies.

03
Flow Generators and Analyzers →

Generate test traffic or replay PCAPs as an endpoint to evaluate throughput and latency.

LICENSED APPLICATIONS

One hardware platform, three types of licensed applications

Select an online analysis, network simulation, or traffic generation application based on your test requirements; the specific features available depend on the selected license and interface configuration.

虹科 線上擷取與協定分析儀
Inline Capture and Protocol Analyzer
Online Capture and Protocol Analyzer →

Capture traffic in real time via transparent connection or SPAN/TAP access to analyze throughput, protocols, errors, and latency.

  • 100% Line-Rate Capture and 28 GB Hardware Cache
  • L1 PCS Layer Extraction and Analysis
  • L1–L7 Filtering and Triggering

Supports bidirectional transparent chaining and can also be connected via a SPAN port or TAP. It provides nanosecond-level timestamps, analysis of hundreds of protocols, customizable filtering and statistics, real-time graphical analysis, and a low-latency, non-retransmitting clock-synchronized pass-through mode. Captured data can be streamed to USB 3.0 devices or remote SSH clients.

虹科 網絡障礙模擬器
Network Impairment Emulator
Network Failure Simulator →

Injection of latency, packet loss, errors, and bandwidth limitations to replicate real-world network conditions, validate application performance, and troubleshoot issues in the field.

  • Fixed Delay vs. Variable Delay / PDV Jitter
  • Bandwidth Limiting and Traffic Shaping
  • Packet Loss, Out-of-Order Packets, and Packet Corruption

Supports dynamic real-time control, multipath impairment simulation, and selective impairment injection under L2–L7 filtering conditions. Configurable link jitter, bit errors, FCS errors, packet tampering, cumulative, and burst errors enable the execution of repeatable fault tests.

虹科 流量產生器與分析儀
Traffic Generator and Analyzer
Traffic Generators and Analyzers →

Perform performance and functional verification through bit error rate, throughput, and high-precision latency testing, as well as testing for interference from abnormal traffic.

  • L2–L3 Line-Rate Traffic Generation and PCAP Replay
  • L1 / L2 / L3 Bit Error Rate Testing
  • One-way and round-trip delay measurements, accuracy: 1 ns

Supports sequence error testing, visualization of the auto-negotiation process, IEEE 802.3az EEE testing, and IEEE 802.3br MAC frame pre-emption testing; It can generate fragmented frames and short frame intervals, and control the transmit clock offset within ±500 ppm.

Browser operations can also be integrated into automated workflows

No client software installation is required; view real-time statistics, alerts, and analysis results through an HTML5 graphical interface.

HTML5 GUI RESTful API Real-Time Statistics and Alerts
TECHNICAL INFORMATION

Technical Specifications
Interface Support

Quickly verify your testing requirements—from target data rates and interface types to measurement tasks.

📄 MGA8410 Product Manual ↗ Online Capture and Protocol Analyzer Presentation ↗ Network Outage Simulator Presentation ↗ Traffic Generator and Analyzer Presentation ↗

Please confirm the interface modules, accessories, software licenses, and specific feature configurations when selecting a model. 28 GB refers to the acquisition cache capacity; 1 ns refers to the latency measurement accuracy specified in the manual.

Device Form Factors
4 ports, 1U chassis
Business Interface
4 × SFP+; supports fiber, DAC direct-attach cables, and copper cable connections
Interface Speed Range
10 MbE to 10 GbE
Reference Clock
10 MHz, 1 PPS Reference Clock Interface
Trigger Interface
Input/Output Trigger Ports (Trigger In/Out)
Standards and Industrial Ethernet
10BASE-T, 100BASE-TX, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T; 2.5G/5GBASE-T conform to IEEE 802.3bz
Fiber Optics / SerDes
100BASE-FX, 1000BASE-X, 2500BASE-X, 2500BASE-R, 5000BASE-X, 5000BASE-R, 10GBASE-R, USXGMII, SGMII
Car Ethernet
100BASE-T1, 1000BASE-T1, 2.5GBASE-T1, 5GBASE-T1, 10GBASE-T1, 1000BASE-RH
The modules and connection solutions required for different interfaces are subject to the actual configuration; the supported interfaces listed do not represent all standard accessories.
Cache Extraction
28 GB hardware cache, supports line-rate packet capture
Data Stream Output
USB 3.0 devices or remote SSH clients
Filtering and Triggering
L1–L7; Supports L1 Ethernet PCS-layer capture and analysis
Delay and Event Analysis
1 ns accuracy; supports bidirectional latency monitoring and event timing analysis, as well as unidirectional and round-trip latency measurements
Data Rate and Bit Error Rate Testing
L2–L3 Line-Rate Traffic Generation, PCAP Replay, L1/L2/L3 Bit Error Rate Testing, Sequence Error Testing
Network Damage
Fixed/variable delay, PDV, bandwidth limitation, link jitter, bit errors, FCS errors, packet loss, corruption, tampering, cumulative/burst errors, and out-of-order packets
Graphical User Interface
HTML5 GUI—no client software installation required
Automation Interface
RESTful API
Observation of Results
Real-time Statistics, Alerts, and Graphical Analysis
Operating Mode
Online capture and protocol analyzer, network fault simulator, traffic generator, and analyzer; enabled on the MGA8410 hardware based on licensing, with the operating configuration confirmed on a per-task basis
APPLICATION SCENARIOS

Industry Applications
Making Testing More Close to Real-World Network Conditions

For various Ethernet systems, incorporate performance validation and fault reproduction into the R&D and testing processes.

虹科 車載以太網測試架構圖
AUTOMOTIVE ETHERNET

Car Ethernet

Conduct packet capture, traffic generation, and functional verification under network failure conditions for in-vehicle Ethernet devices and links.

BASE-T1 / 1000BASE-RH
虹科 工業與 TSN 網絡架構圖
INDUSTRIAL & TSN

Industry and TSN

For industrial communication and time-sensitive networks (TSN), observe protocol and latency performance, combining MAC frame preemption testing with fault injection to verify device behavior.

IEEE 802.3br / Delay Analysis
虹科 IT與儲存網絡測試
IT & STORAGE

IT and Storage Networks

Evaluate the throughput and latency of network devices, and analyze application performance through PCAP replay and congestion simulation.

Traffic Replay / Throughput Analysis
虹科 流動通訊與國防測試
MOBILE & DEFENSE

Mobile Communications and National Defense

Designed for Ethernet-based mobile and defense communication systems, it supports R&D validation through performance testing under conditions of bit errors, delay, and signal degradation.

Bit Error Rate Testing / Network Fault Simulation
HONGKE TECHNICAL SUPPORT

From Testing Requirements to the Right Solution for You

Hongke provides professional technical consulting, scenario-based solution design, and proof-of-concept (POC) support.

01 / CONSULT

Technical Consulting

Review the target interfaces, link speeds, and test tasks to verify that the product capabilities align with project requirements.

02 / DESIGN

Scenario-Based Solution Design

Discuss integration methods, interface modules, operational configurations, and application licensing in the context of the device under test and the existing environment.

03 / VALIDATE

Proof of Concept (POC) Support

Discuss and validate the objectives, test conditions, and methods for evaluating results for key test scenarios.

Related Products

虹科 RELY-TSN-BRIDGE TSN交換機
SOC-E RelyUm Series
RELY-TSN-BRIDGE
TSN Switches
虹科 RELY-TSN-PCIe TSN網卡
SOC-E RelyUm Series
RELY-TSN-PCIe
TSN Network Card
虹科 TSN IP Core
SOC-E SocTek Series
TSN IP Core

Professional technical support from HONGKEI to help you succeed in your project.

Leveraging decades of technical expertise in automotive electronics, industrial automation, data security, and life sciences, Hongke provides customers with end-to-end solutions ranging from critical components and precision instruments to system-level platforms. We do more than just supply products; we are committed to helping our customers achieve long-term success through professional technical consulting and innovative optimization.

 

Testing Services

On-demand sample testing and validation of performance evaluation

Hardware Training

Comprehensive coverage of all aspects of hardware product usage

Software Training

Helps you quickly master the skills of using the software

integrated development

Complete integrated solutions based on requirements
close menu icon

Contact Hongke to help you solve your problems.

Let's have a chat