- Home
- Technical Products
Enterprise Cloud IT Solutions
Test Measurement
Industrial Measurement
- Solutions
Enterprise Cloud IT Solutions
Test Measurement
- Latest Articles
- About Us
EN
CAN Bus Oscilloscope (2-channel / 4-channel)
CAN Bus Oscilloscope (2-channel / 4-channel)
HONGKE CAN Bus Oscilloscopes transform your PC into a powerful automotive test tool. It is suitable for detecting all kinds of communication signals in vehicle network, including CAN Bus, CAN FD, LIN, FlexRay, SENT and other bus protocols. It can also detect various types of sensor and actuator signals on the vehicle, which helps to perform comprehensive automotive electronics diagnosis and test analysis.
Advantages and Strengths
Key Specifications
Ordering Information
Main Features
Application Scenarios
Advantages and Strengths
The 12-bit high-resolution PC oscilloscope module can be connected to a PC via USB interface. With a maximum sampling rate of 250M, it can accurately capture complex automotive waveforms and zoom in on suspicious areas for detailed analysis. Due to the PC architecture, the waveform data can be stored directly in the PC for easy access, printing or sharing via email. Compact and ultra-portable, it is suitable for on-site testing and can be put into a backpack for on-the-go use. No additional power supply is required, only a high speed USB 3.0 cable is needed for power supply and data communication at the same time.
Key Specifications
| Project | Technical Specifications |
|---|---|
| Bandwidth | 20 MHz (10 MHz @ ±50 mV range) |
| channels | 2 / 4 channels |
| vertical resolution | 12 bits |
| accurate | ±1% |
| sensitivity | 10 mV/div to 40 V/div |
| Input range (full scale) | ±50 mV to ±200 V (12 ranges) |
| Input Characteristics | 1 MΩ in parallel with 24 pF |
| Input Type | Floating Ground, BNC Connector |
| Input Coupling | Software Optional AC / DC |
| Overload Protection | ±250 V (DC + AC peak) single input |
| Maximum Sampling Rate | 400 MS/s |
| Single-channel use | 200 MS/s |
| Dual Channel Use | 100 MS/s |
| Buffer Capacity | 250 M samples |
| Waveform Buffer | Up to 10,000 waveforms |
| Time base | 100 ns/div to 5000 s/div |
Ordering Information
| Product Model | Product Name |
|---|---|
| EP013 | CAN Bus Oscilloscope (2-channel) |
| EP014 | CAN Bus Oscilloscope (4 channels) |
Main Features
- Supports CAN Bus, CAN FD, LIN, SENT, FlexRay and other bus physical layer waveform testing and serial decoding.
- Signal testing of various types of sensors and actuators
- Supports mathematical channels and various computing functions for signal calculation and measurement analysis.
- Supports multiple protocols
Application Scenarios
Accessories Package Solution
CAN Bus Oscilloscopes (2/4 channels) Recommended Packages
- 1 PicoScope 4225A Oscilloscope Module
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
1 PicoBNC to 4 mm Test Lead (Red) (HKTA405)
- 2 Flexible Needles (Red) (HKTA162)
- 2 Flexible Felting Needles (Black) (HKTA161)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 x Accumulator Battery Clip (Red) (HKTA157)
- 1 x Battery Clip (Black) (HKTA158)
- 1 USB 3.0 cable (HKTA155)
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
- 1 PicoScope 4225A Oscilloscope Module
- 1 ATC type fuse extension cord (HKTA034)
- 1 Mini ATC Fuse Extension (HKTA035)
- 1 COP High Pressure Ignition Extension (HKTA037)
- 1 COP coil set ground wire (HKTA106)
- 1 x PicoBNC+ Current Clamp: 200A / 2000A (HKTA388)
- 1 PicoBNC+ COP Ignition Probe (HKTA398)
- 1 x PicoBNC+ 60A Current Clamp (HKTA473)
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
- 1 PicoBNC+ to 4 mm Test Lead (Red) (HKTA405)
- 1 multimeter probe (black) (HKTA001)
- 1 Multimeter Probe (Red) (HKTA002)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 box Needle (HKTA008)
- 2 x 4 mm sleeve to unshrouded adapter (HKTA017)
- 1 x Accumulator Battery Clip (Red) (HKTA157)
- 1 x Battery Clip (Black) (HKTA158)
- 2 Flexible Needles (Red) (HKTA162)
- 2 Flexible Felting Needles (Black) (HKTA161)
- 2 PicoBNC+ Secondary Ignition Pickup Cables (HKTA397)
- 1 PicoBNC+ Automotive 10:1 Oscilloscope Probe (HKTA506)
- 1 USB 3.0 cable (HKTA155)
- 1 S-hook
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
- 1 PicoScope 4425A Oscilloscope Module
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
- 1 PicoBNC+ to 4 mm Test Lead (Red) (HKTA405)
- 1 PicoBNC+ to 4 mm Test Lead (Green) (HKTA406)
- 1 PicoBNC+ to 4 mm Test Lead (Yellow) (HKTA407)
- 2 Flexible Needles (Red) (HKTA162)
- 2 Flexible Felting Needles (Black) (HKTA161)
- 1 multimeter probe (black) (HKTA001)
- 1 Multimeter Probe (Red) (HKTA002)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 x Accumulator Battery Clip (Red) (HKTA157)
- 2 Battery Clips (Black) (HKTA158)
- 1 USB 3.0 cable (HKTA155)
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
- 1 PicoScope Oscilloscope Module
- 1 ATC type fuse extension cord (HKTA034)
- 1 Mini ATC Fuse Extension (HKTA035)
- 1 COP High Pressure Ignition Extension (HKTA037)
- 1 COP coil set ground wire (HKTA106)
- 1 x PicoBNC+ Current Clamp: 200A / 2000A (HKTA388)
- 1 PicoBNC+ COP Ignition Probe (HKTA398)
- 1 x PicoBNC+ 60A Current Clamp (HKTA473)
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
- 1 PicoBNC+ to 4 mm Test Lead (Red) (HKTA405)
- 1 multimeter probe (black) (HKTA001)
- 1 Multimeter Probe (Red) (HKTA002)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 box Needle (HKTA008)
- 2 x 4 mm sleeve to unshrouded adapter (HKTA017)
- 1 x Accumulator Battery Clip (Red) (HKTA157)
- 1 x Battery Clip (Black) (HKTA158)
- 2 Flexible Needles (Red) (HKTA162)
- 2 Flexible Felting Needles (Black) (HKTA161)
- 2 PicoBNC+ Secondary Ignition Pickup Cables (HKTA397)
- 1 PicoBNC+ Automotive 10:1 Oscilloscope Probe (HKTA506)
- 1 USB 3.0 cable (HKTA155)
- 1 S-hook
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
- 1 PicoScope 4425A Oscilloscope Module
- 1 ATC type fuse extension cord (HKTA034)
- 1 Mini ATC Fuse Extension (HKTA035)
- 4 COP High Pressure Ignition Extension Cords (HKTA037)
- 1 COP coil set ground wire (HKTA106)
- 1 Jcase Fuse Extension (HKTA168)
- 1 Maxi Fuse Extension (HKTA206)
- 1 set 6-way universal lead (HKTA514)
- 1 x Reverse Radar Probe (HKTA329)
- 1 x PicoBNC+ Current Clamp: 200A / 2000A (HKTA388)
- 1 PicoBNC+ Large Range Linear Temperature Probe (HKTA395)
- 1 PicoBNC+ COP Ignition Probe (HKTA398)
- 1 x PicoBNC+ Resistance Test Lead (HKTA432)
- 1 x PicoBNC+ 60A Current Clamp (HKTA473)
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
- 1 PicoBNC+ to 4 mm Test Lead (Red) (HKTA405)
- 1 PicoBNC+ to 4 mm Test Lead (Green) (HKTA406)
- 1 PicoBNC+ to 4 mm Test Lead (Yellow) (HKTA407)
- 2 multimeter probes (black) (HKTA001)
- 2 multimeter probes (red) (HKTA002)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 Large Crocodile Clip (Black) (HKTA005)
- 1 Large Crocodile Clip (Red) (HKTA006)
- 1 box Needle (HKTA008)
- 1 x 2 Pin Leader (HKTA012)
- 4 x 4 mm Bushing to Non-Bushing Adapter (HKTA017)
- 2 Battery Clips (Red) (HKTA157)
- 2 Battery Clips (Black) (HKTA158)
- 4 Flexible Felting Needles (Black) (HKTA161)
- 4 Flexible Needles (Red) (HKTA162)
- 1 ACS 2-pin lead (HKTA190)
- 4 PicoBNC+ Secondary Ignition Pickup Cables (HKTA397)
- 2 PicoBNC+ Automotive 10:1 Oscilloscope Probes (HKTA506)
- 1 USB 3.0 cable (HKTA155)
- 1 USB 2.0 test cable (4.5 meters) (MI121)
- 2 S-hooks
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
- 1 PicoScope 4425A Oscilloscope Module
- 1 ATC type fuse extension cord (HKTA034)
- 1 Mini ATC Fuse Extension (HKTA035)
- 1 x PicoBNC+ Current Clamp: 200A / 2000A (HKTA388)
- 1 x PicoBNC+ 60A Current Clamp (HKTA473)
- 1 PicoBNC+ to 4 mm Test Lead (Blue) (HKTA404)
- 1 PicoBNC+ to 4 mm Test Lead (Red) (HKTA405)
- 1 PicoBNC+ to 4 mm Test Lead (Green) (HKTA406)
- 1 PicoBNC+ to 4 mm Test Lead (Yellow) (HKTA407)
- 2 multimeter probes (black) (HKTA001)
- 2 multimeter probes (red) (HKTA002)
- 2 x Small Alligator Clips (Black) (HKTA003)
- 2 x Small Alligator Clips (Red) (HKTA004)
- 1 box Needle (HKTA008)
- 1 x 2 Pin Leader (HKTA012)
- 4 x 4 mm Bushing to Non-Bushing Adapter (HKTA017)
- 2 Battery Clips (Red) (HKTA157)
- 2 Battery Clips (Black) (HKTA158)
- 4 Flexible Needles (Red) (HKTA162)
- 4 Flexible Felting Needles (Black) (HKTA161)
- 1 Jcase Fuse Extension (HKTA168)
- 1 ACS 2-pin lead (HKTA190)
- 1 Kostal 3-pin lead (HKTA191)
- 1 Maxi Fuse Extension (HKTA206)
- 1 x Reverse Radar Probe (HKTA329)
- 1 x Keyless entry probe (HKTA330)
- 2 PicoBNC+ Automotive 10:1 Oscilloscope Probes (HKTA506)
- 1 USB 3.0 cable (HKTA155)
- 1 USB 2.0 test cable (5 meters) (MI121)
- 2 S-hooks
- 1 USB finger (with software and related data)
Please consult Hongke sales staff for the price of accessories set
Professional technical support from HONGKEI to help you succeed in your project.
HongKe offers a complete range of CAN / CAN FD bus logging and diagnostic tools, including PC-based diagnostic equipment, display and analysis tools, and stand-alone CAN data loggers supporting CAN, CAN FD, LIN, and J1939 in-vehicle protocols for in-vehicle electronics development, system testing, troubleshooting, and on-site data logging applications.




1 PicoBNC to 4 mm Test Lead (Red) (HKTA405)



