Search
Free Trial

High-Performance In-Vehicle Ethernet Converter

Hongke 100/1000BASE-T1

Media Converter v2 H-MTD

This product is an in-vehicle Ethernet converter that enables full-duplex physical layer conversion between 1000BASE-T1 and 1000BASE-T networks, as well as between 100BASE-T1 and 100BASE-TX networks. The product is equipped with an H-MTD interface and an RJ-45 connector, and supports both the MACsec security protocol and sleep/wake functions.

  • Support for Automotive-Grade Key Agreements: Integrates the OPEN Alliance’s MACsec (TC17) security and TC10 sleep/wake functions to comply with modern automotive network security and power management standards.
  • Multifunctional All-in-One Design: Combines in-vehicle/standard Ethernet conversion, USB-to-CAN (FD) interface, data frame generation, and cable diagnostics, enabling a single device to meet a wide range of testing and diagnostic needs.
  • Flexible configuration and easy system integration: Communication baud rates and master/slave modes support automatic or manual configuration. Free PC software and an open communication protocol are provided to facilitate quick setup and system integration.
  • Industrial-Grade Reliability and Dedicated Interfaces: Features automotive-grade H-MTD connectors with a wide operating temperature range of -40°C to 85°C, supports multiple power supply and mounting options, and is designed to withstand harsh testing environments.
Quote Now
Product Catalog

Functional overview

This device enables full-duplex physical layer conversion between 1000BASE-T1 and 1000BASE-T (Gigabit Ethernet) networks or between 100BASE-T1 and 100BASE-TX (Fast Ethernet) networks. The product is equipped with an H-MTD interface and an RJ-45 connector, allowing for automatic negotiation via Link Partner or manual configuration of the communication rate and master/slave mode.

TC10 supports the transmission and reception of sleep and wake-up commands, while MACsec provides security at the data link layer through configurable RX/TX Security Association Keys (SAKs).

This device is equipped with a USB (virtual serial port) interface, allowing users to configure device parameters and read status information through programming. In addition, the device can also function as a USB-to-CAN/CAN FD interface.

Hongke also offers models equipped with TE MATEnet connectors.

Click here to view the original image

Product Details

  • Key Features
  • Bidirectional Media Conversion: Supports bidirectional conversion between in-vehicle Ethernet and standard Ethernet.
  • Multi-protocol support: Compatible with the 1000BASE-T1 and 100BASE-T1 protocols.
  • Automotive-Grade Safety Standards: Supports the OPEN Alliance MACsec (TC17) security standard.
  • Power Management Features: Supports the OPEN Alliance sleep/wake (TC10) feature.
  • High-Speed Full-Duplex Transmission: Supports 100/1000 Mbps full-duplex communication.
  • Rate Configuration: Supports automatic negotiation or manual selection of the communication rate.
  • Mode Configuration: Supports automatic negotiation or manual selection of master/slave mode.
  • Automatic Polarity Correction: Port T1 supports automatic polarity detection.
  • Data Frame Generation: Built-in data frame generator mode.
  • Monitoring and Diagnostics: Parameter configuration, status checks, and port diagnostics can be performed via USB.
  • Free Software Support: A free PC application for device configuration is provided.
  • Multi-interface integration: Can also function as a USB-to-CAN(/FD) interface.
  • Flexible Power Supply: Supports USB power or external DC power.
  • Housing and Installation: Sturdy aluminum alloy housing, supports DIN rail mounting.
  • Featured Functions

This media converter features a number of advanced functions, such as a data frame generator and cable diagnostics, and can also serve as a USB-to-CAN(/FD) interface while performing media conversion. The device uses an H-MTD automotive Ethernet connector (compliant with the USCAR 777-U-002-1-Z01 standard).

Hongke also offers a free PC application that intuitively displays device status, configures various parameters, and enables advanced features such as MACsec and TC10. Through open communication protocols via USB or CAN(/FD) interfaces, the converter can be easily integrated into any system. Users can configure device parameters (such as T1 port settings, TC10, and MACsec) via programming and read device status in real time.

This converter easily connects a 100BASE-T1/1000BASE-T1 ECU or network to a computer or laptop. With its built-in LED status indicators and DIP switches, it can be conveniently operated without connecting to a PC.

  • Product Images
1000BASE-T1-Media-Conveter-v2-Top-1-300x264
1000BASE-T1-Media-Conveter-v2-MACsec-TC10-1-1-300x253
1000BASE-T1-Media-Conveter-v2-H-MTD-side-768x589-1
1000BASE-T1-Media-Conveter-v2-H-MTD-300x183

Specification

functionality descriptive
Media Conversion
  • 1000BASE-T1 to 1000BASE-T
  • 100BASE-T1 to 100BASE-TX
Configuration Options
  • Speed: 100 / 1000 / Auto-negotiation
  • Mode: Master / Slave / Auto-negotiate
  • Data Frame Generator: On / Off
  • TC10: On / Off
  • MACsec: Enable / Disable + SAK
Communication Channels
  • In-Vehicle Ethernet: Supports 1000BASE-T1 (IEEE 802.3bp) or 100BASE-T1 (IEEE 802.3bw), with MACsec (TC17, IEEE 802.1AE) and Sleep/ Wake-up (TC10) capabilities
  • Standard Ethernet: 1000BASE-T (IEEE 802.3ab – Gigabit Ethernet) or 100BASE-TX (IEEE 802.3u – Fast Ethernet)
  • CAN bus: High-speed CAN channel supporting CAN FD (ISO 11898-1:2015; CAN 2.0A/B; ISO CAN FD)
  • USB: USB 2.0 CDC
System Integration Using the USB virtual serial port or the open communication protocol for CAN(/FD), you can configure port parameters, read port status, configure MACsec and TC10 features, and perform cable diagnostics.
USB-CAN(/FD) Interface In addition to providing media conversion, it can also function as a USB-CAN or USB-CAN FD interface (an open communication protocol based on the USB virtual serial port).
PC Applications Provides a free PC application that can be used to read status information, configure converters, perform cable diagnostics, configure MACsec and TC10, and use USB-CAN(/FD) functionality
Power supply method
  • USB power supply
  • External DC 7–30 V (with polarity and surge protection), accessible via a 2-pin terminal block or a 6-pin Molex connector
motherboard
  • 1000BASE-T1: TE MATENet Interface
  • 1000BASE-T: RJ-45 interface
  • CAN Bus and Power Supply: 6-pin terminal block (Molex Micro-Fit)
  • Power supply: 2-pin terminal block (TE)
  • USB 2.0: USB Type-C port
sizes 84 × 82 × 33 mm
Working Temperature -40 to 85 °C
Installation Method
  • Desktop Mount (includes rubber pad)
  • DIN rail mounting (bracket sold separately)
*For complete specifications, please refer to the equipment data manual.

Free PC Apps

Hongke provides a free PC application to accompany its 100/1000BASE-T1 Media Converter v2 series products.

Main Features
  • Read port status: Link status, data rate, master/slave mode, signal quality, insertion loss, and return loss
  • Converter Settings: Auto-negotiation, 100/1000 speed, master/slave mode
  • Configuring TC10 Features: Read the TC10 status, send wake-up and sleep commands on Port T1, and enter local sleep mode
  • Configuring the MACsec Security Protocol
  • Performing Cable Testing
  • Also functions as a USB-to-CAN(/FD) interface: Configure CAN Channels, Transmit/Receive CAN and CAN FD Data Frames

*This program is designed for Windows systems and runs on the .NET framework.

1000BASE-T1-Media-Converter-Utility-CAN-and-CAN-FD-1200x700
1000BASE-T1-Media-Converter-Utility-Ethernet-1200x700
1000BASE-T1-Media-Converter-Utility-MACsec-1200x700

Click here to view the original image

Featured Functions

Unified Communications Protocol

This media converter supports an open communication protocol for USB or CAN(/FD) interfaces. The protocol supports remote status reading and allows for the configuration of T1 and standard Ethernet ports, as well as TC10 and MACsec features, while also enabling the device to function as a USB-to-CAN(/FD) interface.

Product Code descriptive
HKIC-100/1000BASE-T1-MC-HMTDV2 100/1000BASE-T1 Media Converter v2 H-MTD
HKIC-100/1000BASE-T1-MC-MATENetV2 100/1000BASE-T1 Media Converter v2 MATENet —— See the product page for details.
HKIC-SW-1000BASE-T1V2-NET-SDK .NET SDK API (DLL) for accessing devices via USB (VCP) or CAN/FD. This API supports reading device status, configuring devices, performing cable tests, and using the device as a USB-CAN (FD) interface. One-time payment, lifetime license, valid for a single user address.

Related Products

SAE J2716 Interface

SENT-to-Ethernet / USB / CAN(/FD) Gateways, SENT-to-Analog Converters, Standalone SENT and CAN(/FD) Data Loggers

SENT-USB

Dual-channel SAE J2716-to-USB interface that supports connecting the SENT bus to a computer equipped with a USB port

SENT Bus Gateway

Equipped with two bidirectional SENT channels, two analog output channels, and an RS-232 or CAN bus interface, it is suitable for applications such as SENT communication monitoring and simulation.

In-Vehicle Ethernet
Data Acquisition and Testing Tools

Multifunctional in-vehicle communication interfaces, embedded devices and test and diagnostic tools

Professional technical support from HONGKEI to help you succeed in your project.

We are committed to helping our customers achieve long-term success not only by providing products, but also through professional technical consulting and innovation optimization. By choosing Avision, you are choosing a reliable technology growth partner with international vision and local needs.
 

Testing Services

On-demand sample testing and validation of performance evaluation

Hardware Training

Comprehensive coverage of all aspects of hardware product usage

Software Training

Helps you quickly master the skills of using the software

integrated development

Complete integrated solutions based on requirements
close menu icon

Contact Hongke to help you solve your problems.

Let's have a chat